Service manual

SPEC
2-13
MAINTENANCE SPECIFICATIONS
TIGHTENING TORQUES
CHASSIS
Handlebar bracket and lower bracket M10 53 5.3 39
Handlebar and handlebar bracket M8 23 2.3 13
Brake hose and brake master cylinder M10 26 2.6 19
Brake hose and brake caliper M10 26 2.6 19
Brake master cylinder and holder M6 11 1.1 8.0
Brake master cylinder and brake lever M6 7 0.7 5.0
Rear view mirror (left and right) M10 32 3.2 23
Front wheel axle nut M10 40 4.0 29
Brake hose holder M6 7 0.7 5.0
Front fork and brake caliper M10 35 3.5 25
Bleed screw M8 6 0.6 4.3
Front fork cap bolt M20 50 5.0 36
Lower bracket pinch bolt M10 43 4.3 31
Damper rod bolt M8 23 2.3 17
Upper ring nut M25 75 7.5 54 See NOTE
Lower ring nut M25 30 3.0 22 See NOTE
Brake disc and wheel hub M8 23 2.3 17
Brake camshaft and brake camshaft lever M6 7 0.7 5.0
Driven sprocket and rear wheel drive hub M8 30 3.0 22
Rear wheel axle nut M12 60 6.0 43
Rear shock absorber and frame M10 46 4.6 33
Rear shock absorber and swingarm M10 46 4.6 33
Swingarm pivot nut M12 66 6.6 48
Engine mounting nut M8 34 3.4 25
Engine mounting nut M10 72 7.2 52
Swingarm and drive chain case M6 7 0.7 5.0
Drive chain adjuster locknut M6 7 0.7 5.0
Swingarm and brake torque rod M8 16 1.6 12
Brake shoe plate and brake torque rod M8 19 1.9 14
Rider footrest and crankcase M8 23 2.3 17
Passenger footrest and frame M8 30 3.0 22
Sidestand and rider footrest (bolt) M8 26 2.6 19
Sidestand and rider footrest (nut) M8 17 1.7 12
Front cowling bracket and crankcase cover (left M6 7 0.7 5.0
and right)
Main switch and frame M6 10 1.0 7.2
Ignition coil and frame M6 7 0.7 5.0
Part to be tightened Thread size
Tightening torque
Remarks
Nmm·kg ft·lb
LT
LT
http://mototh.com