Owner`s manual

E
4-21
001559
t
e
w
q
y
001549
q
t
w
r
y
e
F9.9
T9.9
EMU09971
Removing the Propeller
1) Straighten the cotter-pin 1 and pull it
out using a pair of pliers.
2) Remove the propeller nut 2 and wash-
er 3.
3) Remove the deflector 4 (for T9.9), pro-
peller 5 and thrust washer 6.
EMU09981
Installing the Propeller
cC
8 Be sure to install the thrust washer
before installing propeller, otherwise,
lower case and propeller boss may be
damaged.
8 Be sure to use a new cotter pin and
bend the ends over securely.
Otherwise, the propeller could come
off during operation and be lost.
1) Apply Yamaha Marine grease or a cor-
rosion resistant grease to the propeller-
shaft.
2) Install the thrust washer and propeller
on the propeller shaft. Install the deflec-
tor (for T9.9) on the propeller.
3) Install the washer and tighten the pro-
peller nut to the specified torque.
6G8-9-1M-4 4/4/03 11:45 AM Page 22