User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
15
1
Preparing the Power Supply
CAUTION
Even when the power is turned off, electricity is still flowing to the instrument at the minimum level. Remove the electric plug
from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms.
1
• For grand pianos:
Connect the plugs to the DC IN jack (DC IN 24V) located at bottom the piano, and to the AC outlet in the order
shown in the illustration. If you desire a cleaner installation, you can attach the AC adaptor to the adaptor holder
which is located at behind the control unit.
• For grand pianos:
Connect the plugs of the AC adaptor to the DC IN jack (DC IN 16V) on the control unit in the order shown in the
illustration. If you desire a cleaner installation, you can attach the AC adaptor to the adaptor holder (see the
illustration above), and also use the hooks to hold excess cord. The adaptor holder and the hooks are located
behind the control unit.
2
Press the [P] (Standby/On) switch on the control unit to
turn the power on.
The power lamp and the display light. To turn the power off, press the
switch again.
NOTICE
Press only the [
P] (Standby/On) switch when turning the power on. Any other operations, such as pressing the keys,
buttons or pedals may cause the instrument to malfunction.
TA3 TC3 SH3 SC3
1-2
1-1
1-3
AC outlet
AC plug
Power cord
AC
adaptor
DC IN 24V
The shape of the plug and outlet may
differ depending on your locale.
Rear side
DC IN 24V
Control unitAdaptor holder
Adaptor holder
AC adaptor
Hold by hook-and-loop fasteners
TA3 TC3 SH3 SC3
1-2
1-1
1-3
AC outlet
AC plug
Power cord
AC
adaptor
Control unit
Hook
Adaptor holder
The shape of the plug and outlet may differ depending on your locale.