User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
28
Specifying the playback part (right-hand/left-hand) for a MIDI Song
Depending on the particular MIDI Song, such as preset Songs, the Song data may include independent right-hand and
left-hand parts. This type of Song data allows you to specify the playback part, and practice the part of one hand while the
other part is playing back.
NOTE
• A MIDI Song consists of 16 channels and on each of the preset Songs, the right-hand part is assigned to channel 1 and the left is
assigned to channel 2. On this instrument, only channels 1 and 2 can be independently muted; channels 3–16 are always played back.
• You cannot specify the playback part for Songs that have no data in channels 1 or 2, or for the Voice Demo Songs.
You can specify the playback part also when the Song is paused. When you stop playback, the setting is reset to “Lr.”
1
Select a MIDI Song, and then start playback (steps 1–5 on page 25).
2
Hold down Button 1 [Select] for two seconds
to call up the playback part on the display.
3
Rotate the [VALUE] control to select the
part to play back.
Playback continues with the selected part(s).
• Lr: Plays both right-hand and left-hand parts.
• r: Plays only the right-hand part.
• L: Plays only the left-hand part.
Hold down for two seconds