User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
39
4
Other Important Functions (UTILITY)
Adjusting the tempo
The metronome tempo can be set from 5 to 500 beats per minute. During Song playback (page 27), you can adjust the
tempo of a MIDI Song or the speed of an Audio Song by using the operation described below.
NOTE
• When a MIDI Song is being played back, the metronome plays back at the tempo and beat of the Song.
• When an Audio Song is being played back, this operation changes only the playback speed of the Song. The metronome tempo does
not change.
Selecting the time signature (beat)
NOTE
One beat is equal to a quarter note on this instrument. When playing a song written in non-quarter-note units, change the setting
accordingly (for example, when playing a song in 3/2 time, set Beat to 6).
1
Press Button 1 [Metronome] in the UTILITY to call up the current tempo on the display.
2
Rotate the [VALUE] control to adjust the
tempo.
Pressing the [VALUE] control restores the default
setting (120).
1
Press Button 1 [Metronome] in the UTILITY so that the lamp lights up in orange.
2
Hold down Button 1 [Metronome] for three
seconds to call up the beat setting value on
the display.
3
Rotate the [VALUE] control to select the beat.
The beat can be selected from 0 and 2–6. For values
other than 0, the first beat is accented with a bell sound
to signal the start of a measure. Pressing the [VALUE]
control restores the default setting (0; no 1st beat accent).
Pressing Button 1 [Metronome] displays the tempo value.
Beat
Hold down for three seconds.