User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
41
4
Other Important Functions (UTILITY)
Playing the piano along with Rhythm playback
This instrument features rhythm patterns (combinations of drums and bass accompaniment) in various music genres,
allowing you to play and perform along with dynamic Rhythm playback. For information on the available Rhythms, refer
to the “Rhythm List” on page 42.
Playing back a Rhythm
1
Press the Menu button several times until the
[UTILITY] lamp lights up in orange.
2
If the [Rhythm] lamp is not lit in orange,
press Button 2.
The currently selected Rhythm number appears on the
display.
NOTE
If the [Rhythm] lamp is already lit in orange, pressing Button 2 here starts Rhythm playback. To stop playback, press Button 2
[Rhythm] again..
3
Rotate the [VALUE] control to select the
desired Rhythm.
NOTE
The Rhythm cannot be changed while playing or recording a Song.
4
Press Button 2 [Rhythm] to start Rhythm
playback.
During Rhythm playback, a dot at the lower right of the
display flashes at the current tempo. Even when you
change the menu (VOICE/SONG/UTILITY), the dot
keeps flashing while the Rhythm is playing.
NOTE
• Intro and Ending sections are played back at the beginning and ending of the Rhythm playback to vary the arrangement of the
accompaniment. You can turn each of them on or off in Function F6.2 or F6.3 (page 50).
• When Synchro Start is set to on, the [Rhythm] lamp flashes, indicating Rhythm playback is in standby. Pressing any of the keys
starts Rhythm playback. The Synchro Start function can be turned on/off in Function F6.5 (page 51).
TA3 TC3 SH3 SC3
Lights up in orange
Rhythm
number