DIGITAL MIXING CONSOLE Manual de referencia V4.
Tabla de contenido Tabla de contenido Descripción general .................................................................. 4 Pantalla de mantenimiento .................................................... 93 Utilizar este documento ........................................................................................... 4 La pantalla ............................................................................................................... 4 Pantalla Initialize All Memory .......................
Tabla de contenido Procedimientos Utilizar el GEQ ............................................................................................................... Uso de faders para ajustar el GEQ (TF5/TF3/TF1) ........................................................... Ajustar el nivel SEND FROM........................................................................................... Ajuste del nivel de envío desde un canal AUX, canal STEREO y canal SUB para un canal MATRIX (V2.5 y posterior)............
Descripción general Descripción general Utilizar este documento La pantalla Este documento le permite buscar palabras clave y consultar páginas de referencia. A continuación indicaremos las distintas pantallas que aparecen en la consola de la serie TF. Pantalla OVERVIEW Búsqueda de palabras clave Puede utilizar la función de búsqueda de su programa lector de PDF para buscar el texto deseado dentro del documento.
Descripción general I Área de navegación Pantallas de configuración Puede tocar un área de la pantalla OVERVIEW para mostrar la pantalla de configuración para el área correspondiente. CH1–CH32 ձ ղ Muestra las funciones del canal seleccionado en dicho momento. Puede arrastrar la pantalla hacia arriba y hacia abajo para mostrar otras funciones. 1 Muestra la pantalla INPUT. (página 57) 2 Muestra la pantalla EQ. (página 59) 3 Muestra la pantalla GATE. (página 63) 4 Muestra la pantalla COMP.
Descripción general CH33–CH40 1 Muestra la pantalla INPUT. (página 57) 2 Muestra la pantalla EQ. (página 59) 3 Muestra la pantalla FX1. (página 67) 4 Muestra la pantalla FX2. (página 67) 5 Muestra la pantalla SEND TO AUX. (página 73) 6 Muestra la pantalla ASSIGN. (página 74) 7 Muestra la pantalla CH VIEW. (página 76) FX RTN 1/2 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla FX1 o FX2. (página 67) 3 Muestra la pantalla EQ. (página 59) 4 Muestra la pantalla SEND TO AUX.
Descripción general AUX9/10–AUX19/20 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla EQ. (página 59) 3 Muestra la pantalla COMP. (página 65) 4 Muestra la pantalla INSFX. (página 67) 5 Muestra la pantalla OUTPUT. (página 87) 6 Muestra la pantalla CH VIEW. (página 76) STEREO 1 Muestra la pantalla EQ. (página 59) 2 Muestra la pantalla GEQ. (página 85) 3 Muestra la pantalla COMP. (página 65) 4 Muestra la pantalla OUTPUT. (página 87) 5 Muestra la pantalla CH VIEW.
Funcionamiento universal Funcionamiento universal 4 Lista En esta sección vamos a introducir las pantallas que se muestran al pulsar la tecla Library ( ) y la tecla Menu ( ), que se encuentran en la sección de la pantalla del panel superior de la consola. Puede ordenar los elementos de cada una de las listas haciendo clic en su encabezado. (Los elementos de la lista no pueden clasificarse por "Información"). Para seleccionar un Preset, basta con tocarlo.
Funcionamiento universal Mostrar la pantalla Library desde una pantalla de configuración Editar un Preset Cuando se muestra la pantalla Library desde una pantalla de configuración, en función de la pantalla de configuración utilizada, se añade uno de los botones siguientes a la pantalla Library. Botón Recall EQ Se muestra al entrar a la Library desde la pantalla EQ y solo recupera los ajustes del EQ.
Funcionamiento universal Pantalla de teclado Funciones de los botones y de los deslizadores Permite editar títulos y comentarios. Esta pantalla varía en función de la operación que realice. 䐟 䐡 䐢 Elemento Término Descripción Botón de cerrar [X] Tóquelo para cerrar la pantalla actual. 䐠 䐣 䐤 Botón OK Aplica los ajustes actuales. Botón Cancel Cancela la operación y vuelve a la pantalla previa. Botón de borrar Borra la información introducida.
Barra de herramientas Barra de herramientas Pantalla SCENE Para acceder a las funciones más utilizadas y a la configuración del sistema. La barra de herramientas se muestra independientemente del contenido de la pantalla. ձ ղ ճ մ յ ն Permite gestionar configuraciones del mezclador previamente guardadas, o "Scenes". Al recuperar una Scene, puede evitar que algunos ajustes se sustituyan por los ajustes que contiene la Scene; esto se conoce como "recuperación segura".
Barra de herramientas 3 Botón Store Guarda la configuración del mezclador actual y la asigna al número de Scene seleccionado en la lista Scene. Toque este botón para mostrar el teclado y editar el título y el comentario. (Pantalla de teclado página 10) Recuperar una Scene 1. Toque un botón de selección de la lista Scene para seleccionar la lista que contiene la Scene deseada. Se mostrará la lista Scene. 2. Toque la Scene deseada. 4 Botón Recall La Scene seleccionada se resaltará.
Barra de herramientas 7. Toque el botón OK. Establecimiento del tiempo de desvanecimiento para una Scene (V4.0 y posterior) Los tiempos de desvanecimiento se establecerán para la Scene. 1. Seleccione la Scene para la que se debe establecer el tiempo de desvanecimiento. 2. Toque el botón Edit. En la pantalla se mostrará dónde puede editar el título, el comentario y el tiempo de desvanecimiento (Pantalla de teclado página 10). 3. Para activar el tiempo de desvanecimiento, toque el botón FadeTime.
Barra de herramientas Pantalla METER Pantalla FADE TIME (V4.0 y posterior) En esta pantalla, puede activar y desactivar por separado los canales a los que desea aplicar el tiempo de desvanecimiento para la Scene. Muestra el nivel de entrada y salida de todos los canales, y permite seleccionar el punto de medición (es decir, el punto en que se detecta el nivel).
Barra de herramientas 4 Contadores Muestra los niveles de entrada y de salida de los canales. 5 Botón para seleccionar la pantalla del contador Permite seleccionar los contadores que se mostrarán. Existen tres modos de visualización.
Barra de herramientas NOTA Pantalla INPUT/OUTPUT Si se conecta un iPad u otro dispositivo iOS, aparece "iOS device is connected. Use transport control on the device." y el botón de reproducción ya no se muestra. Use la aplicación correspondiente en el dispositivo iOS para controlar la reproducción. Permite configurar entradas y salidas para la reproducción y la grabación. ձ ղ ճ յ ն մ շ 1 Menú de selección de la fuente de RECORD Permite seleccionar la fuente que se grabará.
Barra de herramientas 3. Si desea monitorizar la fuente de grabación, toque el botón RECORD CUE para activar la escucha. Pantalla TITLE LIST Si conecta un dispositivo de almacenamiento USB a la consola a través del conector para iPad, podrá utilizar esta pantalla para reproducir los archivos de audio guardados en el dispositivo y grabar la señal de la fuente 2MIX en el dispositivo. ձ Ajustar la salida ղ ճ 1. Arrastre el Deslizador de nivel de PLAYBACK y ajuste el nivel de reproducción.
Barra de herramientas C Botón de edición del nombre del archivo Si el número total supera 150, incluyendo el número de carpetas, los archivos no se muestran en Title List y no se pueden realizar las operaciones 5 a C. En ese caso, se muestra el mensaje "Recorder supports a maximum of 150 items in a folder. Please remove some files from this folder to continue." (V4.0 y posterior). Permite editar el nombre del archivo. NOTA Si se conecta un iPad u otro dispositivo iOS, aparece "iOS device is connected.
Barra de herramientas Reproducir los archivos almacenados en un dispositivo de almacenamiento USB 1. Toque el archivo que desea reproducir en la lista de archivos. Permite gestionar las señales de escucha y del monitor, así como controlar los osciladores. La pantalla CUE/MONITOR se utiliza para controlar las señales que se monitorizan utilizando auriculares y monitores cercanos.
Barra de herramientas 3 Cuadro de texto de ajuste de PFL Trim (V3.5 y posterior) Ajusta el volumen de la monitorización de CUE cuando PFL está seleccionado. Puede ajustarse en un intervalo de -30 dB a +20 dB. Tóquelo para mostrar la pantalla de entrada de cada valor. (página 10) 4 Botón Mono Permite cambiar la señal del monitor a monoaural. 5 Botón Delay Retrasa la señal del monitor. Comprobar las señales de entrada 1. Toque un botón del modo CUE para seleccionar el modo de escucha deseado. 2.
Barra de herramientas 6 Botones de asignación del oscilador Pantalla OSCILLATOR Determina a qué canales se envía el oscilador. Puede seleccionar varios canales. Permite configurar el oscilador. ձ ղ ճ Ajustar el oscilador 1. Toque el botón del modo del oscilador y seleccione el modo deseado. 2. Utilice los botones de asignación del oscilador para determinar a qué canales se enviará la señal del oscilador.
Barra de herramientas Pantalla SETUP (V3.0 y posteriores) 9 Icono Mute Group (V4.0 y posteriores) (página 39) Permite configurar los ajustes generales del mezclador, así como los ajustes para OMNI OUT, la recuperación segura, [USER DEFINED KEYS], [USER DEFINED KNOBS], los bancos de faders personalizados y otras preferencias. 0 Botón +48V Master ձ ղ շ յ ո Muestra la pantalla MUTE GROUP ASSIGN. ն Es el botón principal que activa y desactiva la función de alimentación phantom de la consola.
Barra de herramientas File Name: Muestra los nombres de archivos y de directorios. Se muestra un icono para cada elemento, que permite distinguir entre ambos. Comment: Muestra todos los comentarios introducidos para los archivos de la consola de la Serie TF. Para editar el comentario de un archivo, seleccione el archivo y luego toque el botón Edit para mostrar el teclado (página 10). Date: Muestra la fecha de modificación de cada elemento.
Barra de herramientas Datos que pueden guardarse y cargarse Pantalla LOAD SELECT (V2.0 y posterior) Permite seleccionar qué datos se cargarán al cargar un archivo de configuración de la serie TF. Los siguientes datos pueden guardarse y cargarse en la pantalla SAVE/LOAD.
Barra de herramientas 2 Sección Confirmation Pantalla PREFERENCE Permite configurar los ajustes operativos generales relativos a la visualización del mensaje de confirmación, al funcionamiento de la tecla [SEL], etc. ձ ղ ճ մ յ Store/Recall: Si está activado, se mostrará un mensaje de confirmación al realizar operaciones de almacenar y recuperar.
Barra de herramientas 4 Sección Key Function (V4.0 y posterior) Display Delay Scale (V2.5 y posterior): Puede seleccionar las unidades deseadas (tramas, metros, pies, milisegundos) que se muestran en el botón DELAY para los canales MATRIX y ST IN. Frame Rate (V3.5 y posterior): Selecciona la velocidad de trama (en número de tramas) para el ajuste de retardo. RTA Offset (V3.6 y posterior): Ajusta la sensibilidad de RTA de las pantallas EQ y GEQ.
Barra de herramientas FUNCIÓN Pantalla USER DEFINED CONTROLS Esta pantalla permite asignar funciones a [USER DEFINED KEYS], [USER DEFINED KNOBS] y al conmutador de pedal. ձ ճ յ CH Select ղ Specific CH CUE Specific CH Effect Bypass EQ Band Select Help Meter 1 Botón Keys Monitor Permite asignar funciones a [USER DEFINED KEYS] en el panel superior.
Barra de herramientas FUNCIÓN PARAMETER1 Igual que el botón Play/Pause de la pantalla RECORDER. Igual que el botón Stop de la pantalla RECORDER. Igual que el botón Next de la pantalla RECORDER. Igual que el botón Previous de la pantalla RECORDER. Igual que el botón Rec de la pantalla RECORDER. La grabación se detiene, el archivo se guarda y la grabación se reanuda inmediatamente como un nuevo archivo. La grabación se inicia de inmediato sin acceder al modo de listo para grabar.
Barra de herramientas 5 Botón Foot Switch FUNCIÓN Permite asignar funciones al conmutador de pedal. Clear CUE յ PARAMETER1 PARAMETER2 Clear CUE CUE Specific CH CH 1–40, ST IN 1, ST IN 2, FX 1, FX 2, Activa y desactiva la escucha para el canal DCA 1–8, AUX 1–8, asignado a PARAMETER 2. AUX 9/10–19/20, STEREO, SUB, MATRIX1–4 (V2.5 y posterior) Effect Bypass FX 1, FX 2, INS FX 1–6 Omite el efecto asignado a PARAMETER 2.
Barra de herramientas FUNCIÓN SCENE PARAMETER1 Descripción Selecciona la siguiente Scene numerada. Dec Selecciona la anterior Scene numerada. Store Asigna los ajustes actuales al número de Scene seleccionado. Recall Recupera la Scene numerada seleccionada. Inc Recall Recupera la siguiente Scene numerada. Dec Recall Recupera la anterior Scene numerada. Direct Recall/ Store TAP TEMPO PARAMETER2 Inc A00–99, B00–99 Asignar una función a [USER DEFINED KEY] 1. Toque el botón Keys.
Barra de herramientas Asignar una función a [USER DEFINED KNOB] Asignar una función al conmutador de pedal 1. Toque el botón Knobs. 1. Toque el botón Foot Switch. 2. Toque el botón de configuración del conmutador de pedal. Se muestra la pantalla donde puede seleccionar el [USER DEFINED KNOB] deseado. Se muestra la pantalla de configuración. Los botones A–D corresponden a los [USER DEFINED KNOBS] A–D. 2. Toque el botón Knob correspondiente al [USER DEFINED KNOB] que desea configurar.
Barra de herramientas Pantalla CUSTOM FADER BANK Configurar el banco de faders personalizado El banco de faders personalizado permite elegir diferentes canales, independientemente del tipo (canales de entrada, buses AUX, MATRIX (V2.5 y posterior), grupos DCA, etc.) y agruparlos en un banco de faders. 1. Toque un botón de fader para seleccionar el fader que desea configurar. ղ 2. Toque el botón del canal que desee asignar al fader seleccionado en el paso 1. 3.
Barra de herramientas 3 Botones Pan Link para AUX1/2–AUX7/8 Pantalla BUS SETUP Activa y desactiva el enlace a panorámica para AUX1/2–AUX7/8. Estos botones solo se muestran si Signal Type del bus correspondiente está ajustado a Stereo. Si estos botones están activados, el ajuste de panoramización de las señales enviadas desde los canales de entrada a los dos buses correspondientes se enlazará con el ajuste de panoramización del bus Stereo. Permite configurar los ajustes de bus.
Barra de herramientas Pantalla OMNI OUT Pantalla SLOT SETUP (V2.0 y posterior) Permite configurar los canales de salida que se envían a las tomas OMNI OUT. Muestra los ajustes e información sobre el rack de E/S Tio1608-D, el sistema de altavoces con alimentación de la serie DZR-D y el sistema de subwoofer con alimentación de la serie DXS-XLF-D que están conectados a la consola a través de la tarjeta NY64-D instalada en la ranura de ampliación.
Barra de herramientas Si el bastidor NY64-D está funcionando en modo Dante AES67, "AES67" aparecerá en la esquina superior derecha del área de visualización SLOT. AES67 MODE Muestra el estado de funcionamiento del modo AES67 Disabled No funciona en modo AES67. Enable Funciona en modo AES67. Device Lock Muestra si Dante Device Lock está activado NOTA Es necesario un Dante Controller (v3.10.0.19 y posterior) para que el NY64-D pueda funcionar en modo AES67. Unlocked Dante Device Lock está desactivado.
Barra de herramientas Información sobre la unidad Tio1608-D NOTA • Es posible utilizar el Dante Controller para cambiar la aplicación de patches Dante aunque la función Quick Config esté activada. Sin embargo, al reiniciar la consola se aplicarán los patches Quick Config. Si desea utilizar el Dante Controller para cambiar estos ajustes, desactive la función Quick Config.
Barra de herramientas A Área de visualización de canales Icono de candado Este icono se muestra cuando Dante Device Lock en las series DZR-D y DXS-XLF-D está activado. Información sobre dispositivos Se muestran iconos que indican las series DZR-D y DXS-XLF-D, así como el ID de unidad, el nombre del producto y el nombre del dispositivo Dante.
Barra de herramientas 4 Información del canal Pantalla RECALL SAFE Muestra la ID, el nombre y el icono del canal. Toque el botón SAFE para activar y desactivar la recuperación segura para el canal correspondiente. Si está activado, no se recuperarán los parámetros cuyos botones de activación/ desactivación de la recuperación segura estén en la posición "On". Permite configurar los elementos que se recuperarán y los que no (es decir, recuperación segura) al recuperar Scenes y Presets.
Barra de herramientas Pantalla MUTE GROUP ASSIGN (V4.0 y posterior) Asignar canales a grupos de mute Le permite configurar el grupo de mute y la protección de mute para cada canal de entrada. INPUT (MUTE GROUP1) y FX (MUTE GROUP2) están preasignados para los grupos de mute. Se pueden asignar canales de entrada o FX1/FX2 para los demás grupos de mute (MUTE GROUP3 a MUTE GROUP6). Utilice las protecciones de mute para excluir un canal de las operaciones de grupos de mute.
Barra de herramientas 6. Toque para seleccionar canales y asignarlos como canales de protección de mute. Pantalla BRIGHTNESS Permite ajustar el brillo de la pantalla táctil, así como los LED, la pantalla de nombre y los colores de los canales en el panel superior. Puede guardar los ajustes de brillo en BANK A y BANK B, pudiendo recuperar los ajustes de brillo deseados que mejor se correspondan a sus condiciones de trabajo. 7.
Barra de herramientas 2 Botón Power Saving Mode 1 Botón para el método de facilitar la dirección IP Permite establecer el tiempo que transcurrirá antes de que la consola pase al modo de ahorro de energía. Puede elegir 30 segundos, 2 minutos, 5 minutos, 10 minutos, 15 minutos o nunca. Seleccione el ajuste que coincida con el método utilizado por la consola para configurar su dirección IP. DHCP: La consola recibe su dirección IP automáticamente.
Barra de herramientas Pantalla TIME Pantalla LOG Permite ajustar el reloj interno de la consola y cambiar el formato de fecha y hora. La fecha y la hora especificadas aquí se utilizarán como marca de tiempo al guardar Scenes. ձ ղ ճ Si se muestran mensajes durante el uso de la consola, se registran por fecha y hora y pueden consultarse más adelante en esta misma pantalla. մ ձ ղ յ ն 1 Ajuste de la fecha ճ Establece el ajuste de la fecha de la consola.
Barra de herramientas Pantalla HELP Muestra información acerca de las operaciones de la consola. Si se activa "Show Help at Startup" en la pantalla PREFERENCE, se muestra automáticamente la pantalla HELP después de iniciar la consola. Puede deslizar el dedo a izquierda y derecha para ver otras páginas. Pantalla ABOUT Muestra información sobre la versión del software del sistema e información sobre la licencia. ձ ղ 1 Botón Version Muestra el número de la versión del software del sistema de la consola.
Barra de herramientas Pantalla LOGIN (V3.0 y posterior) NOTA • Los ajustes predeterminados de fábrica no incluyen una contraseña de administrador. (Todos los usuarios tienen acceso total). Para poder establecer permisos para el resto de usuarios, primero hay que establecer una contraseña para el administrador. • Si un usuario con contraseña asignada inicia una sesión en la consola cuando esta está apagada, la consola le pedirá que introduzca esa contraseña la próxima vez que se encienda.
Barra de herramientas Al establecer una contraseña por primera vez, introduzca la contraseña deseada en el cuadro de texto New Password y, a continuación, vuelva a introducirla en el cuadro de texto Verify. Para cambiar una contraseña, introduzca la contraseña actual en el cuadro de texto Old Password y, a continuación, establezca la nueva contraseña. 2 Nombres de parámetros Toque el botón para permitir/restringir el acceso a los parámetros de todos los canales del mismo tipo.
Barra de herramientas Menú de la pantalla ACCESS PERMISSION Pulse la tecla Menu ( siguientes. Restablecimiento de los ajustes de usuario ) en la pantalla ACCESS PERMISSION para mostrar las opciones Si restablece la consola, todas las contraseñas se borrarán y todas las restricciones desaparecerán. (página 93) 1 Copy ձ ղ Copia en el portapapeles los parámetros de ACCESS PERMISSION del usuario seleccionado. 2 Paste 1. Desde la pantalla SAVE/LOAD, guarde los ajustes internos de la consola. 2.
Pantalla OVERVIEW Pantalla OVERVIEW 4 Muestra la pantalla COMP. (página 65) 5 Muestra la pantalla FX1. (página 67) 6 Muestra la pantalla FX2. (página 67) 7 Muestra la pantalla SEND TO AUX. (página 73) 8 Muestra la pantalla ASSIGN. (página 74) 9 Muestra la pantalla AUTOMIXER (V3.5 y posterior). (página 74) 0 Muestra la pantalla CH VIEW. (página 76) Muestra información acerca de las bandas de canales. Puede abrir la pantalla OVERVIEW pulsando la tecla Home ( ).
Pantalla OVERVIEW 8 Muestra la pantalla GEQ. (página 85) 9 Muestra la pantalla COMP. (página 65) 0 Muestra la pantalla OUTPUT. (página 87) A Muestra la pantalla SEND FROM. (página 88) (V3.0 y posterior) Canales AUX9/10–19/20, canal SUB Canales AUX1–AUX8 ձ ձ ձ ղ ղ ճ ճ մ յ յ ղ ն ճ մ 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla EQ. (página 59) 3 Muestra la pantalla COMP. (página 65) 4 Muestra la pantalla FX. (página 67) 5 Muestra la pantalla OUTPUT.
Pantalla OVERVIEW 4 Muestra la pantalla OUTPUT. (página 87) 5 Muestra la pantalla CH VIEW. (página 76) Sección FADER NOTA • Los canales MATRIX 1–4 se encuentran en el OUTPUT FADER BANK. Para utilizar los faders del panel superior para controlar estos canales, pulse la tecla [OUTPUT] de la sección FADER BANK y, a continuación, abra el OUTPUT BANK en la banda de canal. • En TF1, los canales MATRIX 1–4 no se controlan con los faders, solo se visualizan. Desplácese hasta el área mostrada a la derecha.
Pantalla OVERVIEW 9 Muestra la pantalla LIBRARY. (página 8) 0 Controla el EQ de canales. Sección SELECTED CHANNEL (V4.0 y posterior) NOTA El botón En los apartados EQ, GEQ, GATE y COMP de la sección SELECTED CHANNEL, se pueden realizar operaciones arrastrando o tocando el parámetro indicado para resaltarlo y luego utilizando el mando [TOUCH AND TURN]. Seleccione el tipo de modo 1-knob EQ y cambie entre los tipos de filtro en la pantalla EQ. alterna entre los modos 1-knob y manual.
Pantalla OVERVIEW 9 Controla el EQ de canales. El botón FX1L–2R alterna entre los modos 1-knob y manual. ն Seleccione el tipo de modo 1-knob EQ y cambie entre los tipos de filtro en la pantalla EQ. Toque el icono para que aparezca la pantalla EQ. (página 59) ձ ST IN1L–2R ն շ ո ղ չ ճ ձ շ մ ղ յ ճ պ մ 1 Muestra la pantalla SEND FROM screen. (página 88) 2 Muestra la pantalla FX. (página 67) 3 Muestra la pantalla SEND TO AUX. (página 73) 4 Muestra la pantalla ASSIGN.
Pantalla OVERVIEW ST L/R AUX1–AUX8 ճ մ ձ յ ն ձ ղ ն ղ շ ճ մ յ 1 Muestra la pantalla OUTPUT. (página 87) 2 Muestra la pantalla CH VIEW. (página 76) 3 Muestra la pantalla LIBRARY. (página 8) 4 Controla el EQ de canales. El botón 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla OUTPUT. (página 87) 3 Muestra la pantalla CH VIEW. (página 76) 4 Muestra la pantalla LIBRARY. (página 8) 5 Controla el EQ de canales. alterna entre los modos 1-knob y manual.
Pantalla OVERVIEW AUX9–AUX20 SUB յ մ ձ ձ ն յ ղ ղ ճ շ ն մ ճ 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla FX. (página 67) 3 Muestra la pantalla OUTPUT. (página 87) 4 Muestra la pantalla CH VIEW. (página 76) 5 Muestra la pantalla LIBRARY. (página 8) 6 Controla el EQ de canales. 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla OUTPUT. (página 87) 3 Muestra la pantalla CH VIEW. (página 76) 4 Muestra la pantalla LIBRARY.
Pantalla OVERVIEW MATRIX1–MATRIX4 DCA1–DCA8 մ յ ձ ձ ղ ն ղ ճ 1 Muestra la pantalla DCA ASSIGN. (página 90) 2 Muestra la pantalla CH VIEW. (página 76) 1 Muestra la pantalla SEND FROM. (página 88) 2 Muestra la pantalla OUTPUT. (página 87) 3 Muestra la pantalla CH VIEW. (página 76) 4 Muestra la pantalla DELAY. (página 92) 5 Muestra la pantalla LIBRARY. (página 8) 6 Controla el EQ de canales.
Pantalla OVERVIEW Menu de la pantalla OVERVIEW Pulse la tecla Menu ( Copiar ajustes de un canal y aplicarlos a otro canal ) en la pantalla OVERVIEW para mostrar los siguientes elementos. 1. Seleccione el canal cuyos ajustes desea copiar. 1 CH Copy Copiar los ajustes de este canal Copia los ajustes del canal actual. 2 CH Paste ձ Pega los ajustes de otro canal y los aplica al canal actual. ղ 3 CH Default Recupera los ajustes por defecto del canal actual. ճ 2.
Pantalla OVERVIEW 4. Seleccione el canal al que desea aplicar los ajustes. Los ajustes se aplicarán a este canal 5. Pulse la tecla Menu ( ). Muestra el menú. 6. Toque el icono CH Paste. Icono CH Paste Los ajustes del primer canal seleccionado se aplican al segundo canal seleccionado y luego se cierra el menú.
Pantallas de configuración Pantallas de configuración 2 Botones de selección de entrada Pantalla INPUT Permite seleccionar la fuente de entrada del canal. Las fuentes disponibles dependen del canal cuyos ajustes está editando. INPUT: Se utilizará como fuente de entrada el dispositivo conectado a la toma INPUT. USB: Se utilizará como fuente de entrada el ordenador conectado al conector USB TO HOST. SLOT (V2.
Pantallas de configuración 3 GainFinder 9 Botón Gain Unlink (V1.1 y posterior) Muestra el nivel ajustado de ganancia de la entrada. Cuando ajuste la ganancia de entrada, hágalo de forma que se ilumine el centro del GainFinder. Cuando la fuente de entrada es INPUT, el GainFinder muestra la ganancia de la entrada digital. Se muestra para los canales estéreo y para los canales que tienen el enlace estéreo activado.
Pantallas de configuración 5. Toque el cuadro de texto de la ganancia digital para resaltarlo y luego utilice el mando [TOUCH AND TURN] para definir el ajuste. Pantalla EQ Controla el EQ para cada canal. Un EQ paramétrico de 4 bandas está disponible para CH 1– 32, AUX 1–20, STEREO y MATRIX1-4; un EQ paramétrico de 2 bandas está disponible para CH 33–40, ST IN 1, ST IN 2, FX1, FX2 y SUB.
Pantallas de configuración 5 Botón de selección del tipo de modo EQ 7 Gráfico del EQ Cuando se utiliza el modo 1-knob EQ, le permite seleccionar el tipo de modo 1-knob EQ. Seleccione [Vocal] para los canales de voz, de lo contrario seleccione [Intensity]. Si selecciona [Intensity], puede definir el EQ en un ajuste entre plano y el doble de la intensidad de los ajustes del EQ definidos utilizando el modo manual. Para los canales de salida, puede seleccionar [Loudness].
Pantallas de configuración 8 Visualización de RTA/teclado Para mostrar el RTA o un teclado, toque el extremo inferior del gráfico, donde no aparecen parámetros. RTA es un gráfico que muestra las frecuencias de la señal de entrada una vez aplicado el EQ. La visualización de teclado resulta útil para comprender la relación entre las frecuencias y los tonos musicales. Ajustar el EQ en el modo manual 1. 2. 3. 4. Muestra la pantalla EQ. (página 5) Toque el botón EQ y active el EQ.
Pantallas de configuración Ajustar el HPF Ajustar el LPF 1. Muestra la pantalla EQ. (página 5) 2. Toque el botón HPF y active el HPF. El canal SUB puede utilizar el LPF para cortar las frecuencias altas independientes del EQ, lo que resulta ideal para ajustar la señal enviada a un subwoofer. 1. Muestre la pantalla del EQ del canal SUB. (página 5) 2. Toque el botón EQ y active el EQ. 3. Toque el controlador HPF. 4. Utilice el mando [TOUCH AND TURN] para ajustar el HPF.
Pantallas de configuración Pantalla GATE Menú de la pantalla EQ Pulse la tecla Menu ( ) en la pantalla EQ para mostrar las opciones siguientes. 1 Copy ձ ղ ճ մ Copia los parámetros de EQ del canal seleccionado en el portapapeles. Permite configurar la compuerta de ruido para cada canal. Cuando el nivel de la señal de entrada es menor que un valor especificado (umbral), la señal de salida se reduce un valor especificado (rango). GATE está disponible para CH 1–32.
Pantallas de configuración 7 Deslizador Hold Cuando la señal de entrada cae por debajo del umbral, este ajuste establece el tiempo que transcurre antes de que se cierre la compuerta. Menú de la pantalla GATE Pulse la tecla Menu ( ) en la pantalla GATE para mostrar las opciones siguientes. 1 Copy 8 Deslizador Decay Una vez transcurrido el tiempo de espera, este ajuste establece la rapidez con que se cierra la compuerta. Este valor se expresa como el tiempo necesario para que el nivel cambie en 6 dB.
Pantallas de configuración 8 Deslizador Attack Pantalla COMP Permite configurar el compresor para cada canal. Puede definir los ajustes utilizando el modo 1-knob, que permite utilizar el mando [TOUCH AND TURN] para definir fácilmente los ajustes, o el modo manual, que permite ajustar cada parámetro de forma individual. ղ շ ձ ո Cuando la señal de entrada supera el umbral, este ajuste establece la rapidez con que se aplica el grado máximo de compresión.
Pantallas de configuración 2. Gire el mando [TOUCH AND TURN]. Ajustar el compresor 1. Muestra la pantalla COMP. (página 5) 2. Si el compresor está desactivado, toque el botón COMP para activar la compresión. Los ajustes Attack, Release y Knee quedan fijos en su valor actual, y los ajustes Threshold, Ratio y Out Gain se definen automáticamente. 3. Toque el botón 1-knob y desactive el modo 1-knob COMP. 4. Ajuste el deslizador deseado. Arrastre los deslizadores para ajustar cada parámetro.
Pantallas de configuración 7 Botón Pre Pantalla FX (FX1/2, InsFX1–6) Se muestra para CH 1-40, ST IN 1 y ST IN 2. Permite seleccionar si el módulo de efectos procesará la señal del pre-fader o del postfader. On: Antes del fader Off: Después del fader Permite seleccionar un efecto y editar sus parámetros. ձ ղ ճ մ յպ ջ 8 Botones de selección de parámetro Tóquelos para mostrar otros parámetros disponibles para el efecto actual.
Pantallas de configuración Menú de la pantalla FX Ajustar un efecto Pulse la tecla Menu ( 1. Toque el botón Effects Type. ) en la pantalla FX para mostrar las opciones siguientes. 1 Copy Cuando se muestre la pantalla EFFECTS TYPE, seleccione el tipo de efecto deseado. ձ 2. Toque el botón Send. Botón Send ղ 3. Ajuste los deslizadores de parámetro de la forma deseada. ճ Puede ajustar las características del efecto, el balance húmedo/seco, etc.
Pantallas de configuración Parámetros de efectos REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE Reverberaciones de una entrada, de una sala con dos salidas, de habitación, de escenario y de placa. Parámetro Reverb Time Intervalo Descripción DELAY LCR Retardo 3-tap de dos salidas y una entrada. Parámetro Intervalo Descripción Delay L 1,0 ms–2700,0 ms Tiempo de retardo del canal izquierdo. Delay C 1,0 ms–2700,0 ms Tiempo de retardo del canal central.
Pantallas de configuración DELAY-REVERB (V1.1 y posterior) Efecto de una entrada y dos salidas, con un retardo y una reverberación conectados en serie. Parámetro Intervalo Descripción GATE REVERB, REVERSE GATE (V1.1 y posterior) Reflexión temprana de una entrada y dos salidas, y una reflexión temprana con compuerta inversa. Parámetro Intervalo Descripción Delay 1,0 ms - 2700,0 ms Tiempo de retardo. Feedback Gain -99% - 99% Intensidad del feedback.
Pantallas de configuración SYMPHONIC (V1.1 y posterior) Efecto sinfónico con dos entradas y dos salidas. Parámetro Intervalo Descripción M BAND COMP (V1.1 y posterior) Compresor de tres bandas con dos salidas y dos entradas. Cada banda tiene indicaciones de reducción de ganancia y solo. Parámetro Intervalo Descripción Frequency 0,05 Hz - 10,00 Hz Velocidad de modulación Depth 0% - 100% Profundidad de la modulación. Low Gain -12,0 dB - +12,0 dB Ganancia de la banda baja.
Pantallas de configuración PING PONG DELAY (V2.0 y posterior) Retardo ping-pong de dos salidas y una entrada. El sonido retardado alterna entre la derecha y la izquierda a intervalos iguales. Parámetro Intervalo Descripción Delay 1,0 ms - 1.350,0 ms Tiempo de retardo. Feedback Gain -99% - 99% Intensidad del feedback. High Ratio 0,1 - 1,0 Intensidad del feedback de alta frecuencia. HPF Thru, 21,2 Hz - 8,00 kHz Frecuencia de corte del filtro de paso alto.
Pantallas de configuración 3 Botón Pre Pantalla SEND TO AUX Selecciona si la señal se enviará al canal AUX desde antes o después del fader. On: Antes del fader Off: Después del fader Si está activado, puede seleccionar si la señal se enviará directamente antes del EQ o directamente antes del fader, desde "Pre Fader Send Point" en la pantalla BUS SETUP (página 33). Permite configurar la intensidad de la señal que se envía desde cada canal a los buses AUX.
Pantallas de configuración Pantalla ASSIGN Pantalla AUTOMIXER (V3.5 y posterior) Permite configurar los ajustes de recuperación segura y protección de silenciamientos, asignaciones del grupo de DCA, señales enviadas al bus SUB, etc. Ajusta el AUTOMIXER que puede utilizarse para CH1–CH8. ձ ղ ճ Acerca del AUTOMIXER AUTOMIXER es una función que automatiza la mezcla de sonido de conversaciones oídas en conferencias, tertulias, etc.
Pantallas de configuración 5 Cuadro de texto Weight NOTA Ajusta el nivel de señal que entra en la cadena lateral del AUTOMIXER. Si se ajusta al mismo valor que otros canales, la ganancia de las señales de audio que entran al mismo tiempo se distribuirá de forma uniforme. Cuando este valor aumenta, la ganancia de las señales de audio que entran al mismo tiempo se distribuirá para crear un sonido con un volumen más alto en comparación con otros canales.
Pantallas de configuración 5 Cuadro de botones Pantalla CH VIEW Tóquelo para mostrar la pantalla de configuración de la función correspondiente. Puede tocar los botones EQ, GATE y COMP que se muestran aquí para activar y desactivar la función correspondiente. Botón HA: Muestra la pantalla INPUT. (página 57) Botón EQ: Muestra la pantalla EQ. (página 59) Botón GATE: Muestra la pantalla GATE. (página 63) Botón COMP: Muestra la pantalla COMP. (página 65) Botón AUTOMIXER (V3.
Pantallas de configuración C Indicador del puerto de salida directa 2 Botón Recall Safe Indica el puerto de salida directa del canal. Para obtener información sobre los canales y los puertos de salida, consulte "Relación entre entradas de Quick Config y canales de entrada" (page 106). D Botón de indicación de la salida directa Activa y desactiva la recuperación segura para el canal correspondiente.
Pantallas de configuración La información mostrada aquí indica si la señal enviada al bus AUX es la señal del prefader o del post-fader. La señal del pre-fader se muestra en verde y la señal del post-fader se muestra en gris. 4 Botón Mute Safe Tóquelo para excluir temporalmente el canal seleccionado del grupo de mute de entrada. Si silencia el grupo de mute de entrada, los canales de ese grupo con la protección de mute activada no se silenciarán.
Pantallas de configuración B Indicador de nivel de la salida del canal 5 Botón de activación/desactivación del canal Muestra el nivel de la señal de salida del canal. Activa y desactiva el canal seleccionado. 6 Deslizador BAL (balance) FX1L–FX2R Ajusta el balance del volumen izquierdo/derecho del canal. ձ ղ ճ 7 Botón SEND TO AUX յ ն Tóquelo cuando desee mostrar la pantalla SEND TO AUX. Muestra la intensidad de la señal proveniente del canal seleccionado que se envía a cada bus AUX.
Pantallas de configuración 1 Nombre del canal 2 Botón Recall Safe Toque para mostrar la pantalla CH NAME. Toque para mostrar información de un canal diferente. Activa y desactiva la recuperación segura para el canal correspondiente. Puede mostrar la pantalla RECALL SAFE (página 38) tocando el botón de desplazamiento de la esquina derecha del botón Recall Safe. 2 Botón Recall Safe Activa y desactiva la recuperación segura para el canal correspondiente.
Pantallas de configuración 1 Nombre del canal SUB Toque para mostrar la pantalla CH NAME. Toque para mostrar información de un canal diferente. ձ ղ ճ մ յ 2 Botón Recall Safe Activa y desactiva la recuperación segura para el canal correspondiente. Puede mostrar la pantalla RECALL SAFE (página 38) tocando el botón de desplazamiento de la esquina derecha del botón Recall Safe. 3 Cuadro de botones Tóquelo para mostrar la pantalla de configuración de la función correspondiente.
Pantallas de configuración 7 Indicador de nivel de la salida del canal 5 Deslizador BAL (balance) Muestra el nivel de la señal de salida del canal. Ajusta el balance del volumen izquierdo/derecho del canal. 6 Botón OUTPUT ST L, ST R Muestra la pantalla OUTPUT. (página 87) ձ ղ ճ մ յ ն 7 Deslizador del nivel de salida del canal Ajusta el nivel del fader para el canal seleccionado. 8 Indicador de nivel de la salida del canal Muestra el nivel de la señal de salida del canal. MATRIX1– MATRIX4 (V2.
Pantallas de configuración 3 Cuadro de botones Canales AUX/MATRIX (V4.0 y posterior) Tóquelo para mostrar la pantalla de configuración de la función correspondiente. Puede tocar los botones EQ y COMP que se muestran aquí para activar y desactivar la función correspondiente. Botón FROM: Muestra la pantalla SEND FROM. (página 88) Botón EQ: Muestra la pantalla EQ. (página 59) Botón DELAY: Muestra la pantalla DELAY.
Pantallas de configuración 6 Botón Color Pantalla CH NAME Toque aquí para mostrar una lista de los colores de canal disponibles. Permite ajustar el nombre del canal, el icono y el color del canal. ձ ղ ն ճ մ յ Toque el color deseado para utilizarlo como color del canal. 1 Cuadro de texto Name Aquí se indica el nombre del canal. Toque el cuadro de texto para escribir el nombre desde la pantalla KEYBOARD.
Pantallas de configuración Pantalla GEQ Cuando el botón Fader Assign está activado, puede utilizar esta área para cambiar qué bandas podrán ajustarse con los faders. (Solo TF3 y TF1). Puede utilizar el ecualizador gráfico interno (GEQ) para procesar la señales de los canales AUX 1–8 y STEREO. El GEQ es un EQ mono de 12 bandas. Cada banda tiene un ancho de 1/3 de octava, con un intervalo de ganancia ajustable de ±15 db. Están disponibles 31 bandas; puede ajustar la ganancia para un máximo de 12 bandas.
Pantallas de configuración Utilizar el GEQ Uso de faders para ajustar el GEQ (TF5/TF3/TF1) 1. Toque el botón GEQ para activar el GEQ. 1. Toque el botón Fader Assign para activarlo. 2. Deslice el dedo a izquierda o a derecha en los deslizadores de ganancia para mostrar las bandas deseadas. 3. Arrastre los deslizadores hacia arriba y hacia abajo para ajustar la ganancia de las bandas correspondientes.
Pantallas de configuración Pantalla OUTPUT 3 Control deslizante SUB (V3.0 y posterior) Permite configurar cómo se enviarán los canales de salida. Los botones mostrados dependen del tipo de canal de salida seleccionado. 4 Cuadro de texto para Out Gain Determina la cantidad de señal enviada desde el canal seleccionado hasta el bus SUB. Permite ajustar la ganancia de salida. Si está seleccionado, puede utilizar el mando [TOUCH AND TURN] para definir el ajuste.
Pantallas de configuración Pantalla SEND FROM Ajustar el nivel SEND FROM 1. Toque el botón ON para los canales de entrada que desea enviar. 2. Toque el deslizador de panoramización de envío y utilice el mando [TOUCH AND TURN] para ajustar la panoramización de la señal del canal de entrada que se envía. 3. Arrastre los deslizadores de nivel de envío para ajustar la intensidad de la señal del canal de entrada que se envía. Permite enviar señales desde cada canal.
Pantallas de configuración Ajuste del nivel de envío desde un canal AUX, canal STEREO y canal SUB para un canal MATRIX (V2.5 y posterior) Menú de la pantalla SEND FROM Pulse la tecla Menu ( 1. Toque el botón ON para el canal AUX, el canal STEREO o el canal SUB que desea enviar. (Está activado por defecto). 2. Arrastre los deslizadores de nivel de envío para ajustar la intensidad de la señal del canal AUX, STEREO o SUB que se envía. 3.
Pantallas de configuración Pantalla DCA ASSIGN Asignar canales a un grupo de DCA Permite agrupar canales asignándolos a grupos de DCA. ձ ղ մ 1. Pulse los botones [INPUT1] e [INPUT2] en el panel superior de forma simultánea para mostrar los canales GROUP. 2. Pulse la tecla [SEL] del panel superior correspondiente al grupo de DCA que desea configurar. 3. Toque los botones DCA correspondientes a los canales que desea asignar al grupo. (Puede seleccionar varios canales).
Pantallas de configuración Usos de DCA Puede asignar los grupos de DCA 1–8 a las 8 últimas bandas de canal del extremo derecho del panel superior de la consola. (TF5: bandas de canal 25–32; TF3: 17–24; TF1: 9–16) A continuación podrá asignar los canales de un grupo de DCA a las bandas de canal del extremo izquierdo del panel superior de la consola pulsando la tecla [SEL] del correspondiente grupo de DCA.
Pantallas de configuración 4 Deslizador DELAY Pantalla DELAY (V2.5 y posterior) Ajusta el retardo para la salida de señales desde los canales MATRIX, y el retardo para la entrada de señales en el canal ST IN (V4.0 y posterior). ձ ղ Permite ajustar el tiempo de retardo. El tiempo de retardo se muestra en tramas, metros, pies o ms (milisegundos). 5 Ajuste DELAY Determina el tiempo de retardo especificando las tramas, la distancia (en metros o pies) o el tiempo (en milisegundos).
Pantalla de mantenimiento Pantalla de mantenimiento Pantalla Initialize All Memory Permite acceder a las funciones de mantenimiento. Recupera los ajustes por defecto de la memoria de la consola, incluyendo la memoria Scene y las Libraries. ձ ղ ձ ճ մ յ ն շ ո 1 Muestra la pantalla Initialize All Memory. 2 Muestra la pantalla Initialize Current Memory. (página 94) 3 Muestra la pantalla Initialize NY64-D. (página 94) (V3.0 y posterior) 4 Muestra la pantalla Input Port Trim.
Pantalla de mantenimiento Pantalla Initialize Current Memory Pantalla Initialize NY64-D (V3.0 y posterior) Recupera los ajustes por defecto de la memoria actual de la consola. La memoria de Scene y las Libraries no recuperan los ajustes por defecto. ձ ձ 1 Botón INITIALIZE Restablece los ajustes de la tarjeta NY64-D instalada en la ranura de expansión.
Pantalla de mantenimiento Pantalla Input Port Trim Pantalla Output Port Trim Permite ajustar la ganancia de cada toma INPUT en incrementos de 0,01 dB. Permite ajustar la ganancia de cada toma OMNI OUT en incrementos de 0,01 dB. ձ ձ ղ ղ 1 Botones de selección de la toma OMNI OUT 1 Botones de selección de la toma INPUT Seleccione aquí la toma OMNI OUT que desea configurar.
Pantalla de mantenimiento Pantalla Fader Calibration (TF5/TF3/TF1) Calibración de los faders En algunos entornos operativos, pueden producirse desfases en el movimiento de los faders motorizados. Para corregirlas, puede utilizar esta pantalla 1. 2. 3. 4. 5. Pulse la tecla [SEL] del panel superior correspondiente al fader que desea calibrar. Toque el botón START de la pantalla FADER CALIBRATION MODE. Toque el botón OK cuando se muestre el mensaje de confirmación.
Pantalla de mantenimiento Pantalla Channel Color Calibration (TF5/TF3/TF1) Ajustar los colores de canal Puede ajustar los colores de los LED como lo desee. Los colores de los LED se ajustan de uno en uno. ձ 1. Pulse la tecla [SEL] del panel superior correspondiente al color del canal que desea ajustar. 2. Toque un botón de color para elegir un color. 3.
Referencia Referencia Lista de parámetros guardados en las Scenes y Presets CH 1-40 Recuperación de biblioteca de canales*3 Recall CH (Todos) Ganancia +48V Φ Digital Gain HA Selec entr.
Referencia ST IN 1, ST IN 2 Recuperación de biblioteca de canales Se puede utilizar la recuperación segura de Scenes Recall CH (Todos) HA (Excepto) HA Selec entr. Nombre O O O O O Digital Gain O O O O O O O*1 O O O O O*1 O*1 O O O Category, Color, Icon O O O PEQ O O O O Delay O O O O TO FX Todo O Nombre del canal TO AUX Scene Φ Selec entr. HA Recall EQ Selec entr.
Referencia FX 1, FX 2 Recuperación de biblioteca de canales Se puede utilizar la recuperación segura de Scenes Recall CH (Todos) (Excepto) FX Recall FX Recall EQ Scene Con envío*1 Todo FX Procesando Enviar a Fader On Nombre Stereo Link Nombre Nombre del canal O O O O O O Category, Color, Icon O O O O O O FX O O O PEQ O O O Level O O Pan O O ON O Pre O TO AUX O O O O O O O O O O O O O O O O O Assign O O O O O Balance O O O O O Level
Referencia AUX Recuperación de biblioteca de canales Se puede utilizar la recuperación segura de Scenes Recall CH*4 (Todos) Recall EQ (Excepto) GEQ*1 FX*2 Recall GEQ*1 Recall COMP*1 Recall FX*2 Scene Con envío Todo FX*2 GEQ*1 Procesando Fader On Ganancia/ Nombre Φ Stereo Link Nombre Nombre del canal O O O O O O O*2 Category, Color, Icon O O O O O O O Signal Type*1 O O O Pre Fader Send Point*5 O O O O O O O O O Pan Link O O O O PEQ O O O O GEQ*1 O
Referencia STEREO, SUB Recuperación de biblioteca de canales Se puede utilizar la recuperación segura de Scenes Recall CH (Todos) (Excepto) GEQ*1 Recall EQ Recall GEQ*1 Recall COMP Scene Con envío*2 Todo GEQ*1 Procesando Fader On Ganancia/ Φ Nombre Stereo Link*1 Nombre Nombre del canal O O O O O O Category, Color, Icon O O O O O O LPF*2 O O O PEQ O O O GEQ*1 O O O COMP O O O O O O O O*3 O O O O O Fader O O O O STEREO/SUB Level Link*2 O O*2 O*2
Referencia MATRIX (V2.
Referencia Lista de parámetros con acceso limitado CH1-40 CH1-40 HA Selec entr. Procesando Enviar a Fader/ON Nombre Other High Level O O O O O O O Mid Level O O O O O X O Low Level X X X X O X X HA Selec entr.
Referencia GENERAL Scene A Scene B Library A Library B Setup Other High Level Mid Level Store O O Low Level X Recall O O O Store O O X Recall O O O Store O O X Recall O O X Store O O X Recall O O X +48V Master O X X Bus Setup O O X Brightness O O O Custom Fader Bank O O X File Load O X X Network X X X OMNI OUT Patch O X X Preference O O O Recall Safe O X X Slot Setup O X X Time X X X User Defined Control O X X Automixer Gr
Referencia Relación entre entradas de Quick Config y canales de entrada Tio1608-D: ENTRADA DE TF Tio1608-D UNIT ID 1: INPUT1 RANURA: CANAL DE ENTRADA DE TF SLOT IN 1 Selec entr. CH1 CANAL DE SALIDA DE TF: RANURA Salida directa CH1 SLOT OUT 1 Tio1608-D: SALIDA DE TF Sin conexión Tio1608-D UNIT ID 1: INPUT2 SLOT IN 2 Selec entr. CH2 Salida directa CH2 SLOT OUT 2 Sin conexión Tio1608-D UNIT ID 1: INPUT3 SLOT IN 3 Selec entr.
Referencia Tio1608-D: ENTRADA DE TF RANURA: CANAL DE ENTRADA DE TF CANAL DE SALIDA DE TF: RANURA Tio1608-D: SALIDA DE TF Sin conexión SLOT IN 41 Sin conexión Salida AUX9 SLOT OUT 41 Tio1608-D UNIT ID 2: OUTPUT3 Sin conexión SLOT IN 42 Sin conexión Salida AUX10 SLOT OUT 42 Tio1608-D UNIT ID 2: OUTPUT4 Sin conexión SLOT IN 43 Sin conexión Salida AUX11 SLOT OUT 43 Tio1608-D UNIT ID 2: OUTPUT5 Sin conexión SLOT IN 44 Sin conexión Salida AUX12 SLOT OUT 44 Tio1608-D UNIT ID 2: OUTPUT6
Referencia Advertencias y mensajes de error Mensaje Mensaje Descripción Item Already Exists. Replace it? Aparece cuando se va a almacenar (sobrescribir) una biblioteca. File Already Exists, Replace it? Si ha seleccionado Save As, el nombre del archivo que intenta guardar coincide con el nombre de otro archivo ya existente. Aparece cuando se van a guardar (sobrescribir) datos. Descripción Cannot Close This Popup. La ventana emergente no se ha podido cerrar. Not Bookmarked.
Referencia Mensaje Descripción Mensaje Dante Module Error! Se ha producido un error con el módulo Dante de la tarjeta NY64-D, la unidad Tio1608-D u otro dispositivo. Illegal Dante Module MAC Address! La dirección MAC de la tarjeta NY64-D está dañada y no es posible la comunicación. Dante Module Memory Error! Se ha producido un error de memoria con el módulo Dante de la unidad Tio1608-D u otro dispositivo.
Índice Índice Numerics 1-knob COMP.................................. 1-knob EQ ....................................... Intensity ....................................... Loudness ..................................... Vocal............................................ 65 60 60 60 60 A Advertencias y mensajes de error ... 108 Alimentación phantom..................... 58 Archivo de audio.............................. 15 Auto CH Select................................ 25 AUX9/10–AUX19/20.......................
Índice I Operaciones y ajustes E A Acceso Aplicación de permisos de acceso ... Ajuste Ajuste del nivel de envío.............. AUTOMIXER ............................... Calibración de los faders ............. Colores de canal.......................... Compresor................................... Compuerta................................... Efectos......................................... Efectos de inserción .................... Enlace estéreo, fuente de entrada ........................................
Dimensiones del producto Dimensiones del producto TF5 TF3 225 599 599 225 716 866 TF1 TF1 montado en rack (14U) 224 599 599 225 480 510 - 112 - Unidad: mm TF series Manual de referencia
Dimensiones del producto TF-RACK 374 409 35 22 396 368 430 132 480 Unidad: mm - 113 - TF series Manual de referencia
INPUT 1-16, 17-24, 25-32( TF5 ) INPUT 1-16, 17-24, 1-8( TF3 ) INPUT 1-16, 1-8, 9-16( TF1 ) COMBO JACK + - GAIN/TRIM USB IN 1-32 SLOT IN 1-32 Pr e DG Pr e HPF EQ OUT GATE OUT COMP OUT METER METER METER METER METER GR METER GR METER GATE COMP METER SUB LEVEL FADER(DCA) ĭ 32 DIGITAL GAIN Pr e DG Pr e HPF Pr e EQ Post EQ ST MATRIX1 MATRIX2 MATRIX3 MATRIX4 CUE L CUE R ST L ST R SUB AUTOMIXER CH1-8 Only Pr e FADER TO FX1/FX2 32 SUB PAN ON 4BAND EQ HPF FX1 FX2 AUX1 AUX2 :
LEVEL ON Sine Wave Pink Noise Burst Noise CUE L CUE R MATRIX1 MATRIX2 MATRIX3 MATRIX4 Pr e EQ METER EQ OUT METER GEQ O UT METER GR METER : : AUX2 ST L ST R SUB STEREO AUX1 OSC METER FX1 FX2 AUX9 AUX10 : AUX19 AUX20 AUX1 AUX2 : AUX8 OSCILLATOR 4BAND EQ : AUX8 ON AUX9 FlexG EQ SEND COMP ON AUX19 SEND GAIN Pre Fader R Pr e Fader L STEREO OUT L ĭ ĭ STEREO OUT R Post ON R Post ON L TRIM DA CUE MATRIX:Stereo TRIM CUE Pre Fader / Post ON L Pr e Fader / Post ON R ST R DA TRI
COMBO JACK + - 16 AD GAIN/TRIM USB IN 1-32 SLOT IN 1-32 Pr e DG Pr e HPF EQ OUT GATE OUT COMP OUT METER METER METER METER METER GR METER GR METER GATE COMP Post ON METER SUB LEVEL FADER(DCA) ĭ 32 DIGITAL GAIN Pr e DG Pr e HPF Pr e EQ Post EQ MATRIX1 MATRIX2 MATRIX3 MATRIX4 CUE L CUE R ST L ST R SUB FX1 FX2 AUTOMIXER CH1-8 Only Pr e FADER TO FX1/FX2 32 ST PAN ON 4BAND EQ HPF SUB Automix Gain METER INPUT SELECT AUX9 AUX10 : AUX19 AUX20 AUX1 AUX2 : AUX8 USB OUT 1
LEVEL ON Sine Wave Pink Noise Burst Noise CUE L CUE R MATRIX1 MATRIX2 MATRIX3 MATRIX4 Pr e EQ METER EQ OUT METER GEQ O UT METER GR METER : : AUX2 ST L ST R SUB STEREO AUX1 OSC METER FX1 FX2 AUX9 AUX10 : AUX19 AUX20 AUX1 AUX2 : AUX8 OSCILLATOR 4BAND EQ : AUX8 ON AUX9 FlexG EQ SEND COMP ON AUX19 GAIN Pre Fader R Pr e Fader L STEREO OUT L ĭ ĭ STEREO OUT R Post ON R Post ON L TRIM SEND + - DA Post ON L BAL Post ON R AUX20 ST L ON MATRIX:Mono Post ON R : Post ON METER
Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.