User Manual

Table Of Contents

Toolbar

Reference Manual

TF series

RECORDER screen menu

Press the Menu key ( ) from the RECORDER screen to display the following items.

MONITOR screen

Allows you to manage cue and monitor signals and to control oscillators.

The CUE/MONITOR screen is used to control the signals that are monitored using

headphones and near-field monitors. Here you can select the sources that will be

continuously monitored, and select individual channels for monitoring using the CUE feature.

The OSCILLATOR screen is used to configure the oscillator and turn it on and off. The console

has a built-in oscillator that can output a sine wave or pink noise to the desired bus, allowing

you to check external devices or test the characteristics of a venue.

CUE/MONITOR screen

Allows you to monitor certain inputs using headphones or speakers. You can select which

sources will be monitored, change the monitor signal to mono, or add a delay.

1 CUE point selection buttons

Selects the point in the signal path that will be monitored.

PFL: Before the fader

AFL: After the fader (inputs are PFL only)

2 CUE mode button

Used to select the CUE mode.

Mix CUE: Enables cue for multiple channels.

Last CUE: Enables cue for the last channel selected.

Playing back files stored on a USB storage device

1. Touch the file that you want to play in the file list.

To play a file stored in a different directory, touch the parent directory button and navigate to the

desired directory.

2. Touch the playback mode selector button and

select the desired mode.

3. Touch the play button.

Playback begins.

1 Make Dir

Makes a new directory in the current directory. If

the number of audio files in a folder, including the

number of folders, exceeds 150, then the Make Dir

function is disabled.

2 Delete

Deletes the selected file.

Selected fileParent directory button

Play button

Playback mode selector button

ձղճմյն

պջ