User Manual

Toolbar
Reference Manual
TF series
- 20 -
3 PFL Trim setting text box (V3.5 and later)
Adjusts the CUE monitor volume when PFL is selected. This can be set within a range of
-30 dB to +20 dB. Touch to display the input screen for each value. (page 10)
4 Mono button
Allows you to change the monitor signal to mono.
5 Delay button
Delays the monitor signal.
6 Monitor output button
Turns the monitor output on and off.
The signal is output from the [PHONES] jack regardless of this setting.
7 Monitor level meter
Displays the monitor level.
8 Monitor level slider
Adjusts the monitor output level.
The signal is output from the [PHONES] jack regardless of this setting.
9 Clear CUE button
Cancels all cue selections.
0 Delay setting
Delay can be specified in frames (V3.5 and later), meters, feet, or ms (milliseconds).
Touch a text box to display the keyboard and enter a value. (page 10)
A Monitor selection buttons
Allow you to select the sources that will be monitored.
TF5/TF3/TF1
TF-RACK
Checking the input signals
1. Touch a CUE mode button to select
the desired cue mode.
2. Select the desired monitor sources by
touching the corresponding monitor
selection buttons.
3. Select the desired cue point by
touching the corresponding CUE
point selection button.
4. Touch the PFL Trim setting text box to
set the CUE monitor volume.
5. Touch the monitor output button to
turn the monitor output on and off.
6. Drag the monitor level slider to adjust
the monitor level.
7. Select the desired delay time.
Touch one of the delay setting text boxes to
display the keyboard. This can be specified in
frames, meters, feet or ms (milliseconds). The
frame rate can be set in the Others section of
the PREFERENCE screen. (page 26)
8. Touch the delay button.
The delay is turned on.
Monitor level
slider
Delay button
Delay setting
Tex t b oxe s