User Manual
Table Of Contents
Toolbar
Reference Manual
TF series
-
22
-
SETUP screen (V3.0 and later)
Allows you to configure general mixer settings, as well as settings for OMNI OUT, Recall Safe,
[USER DEFINED KEYS], [USER DEFINED KNOBS], custom fader banks, and other
preferences.
1 Save/Load icon (page 23)
Displays the SAVE/LOAD screen.
2 Preference icon (page 25)
Displays the PREFERENCE screen.
3 User Defined Control icon (page 27)
Displays the USER DEFINED CONTROLS screen.
4 Custom Fader Bank icon (page 32)
Displays the CUSTOM FADER BANK screen.
5 Bus Setup icon (page 33)
Displays the BUS SETUP screen.
6 OMNI OUT icon (page 34)
Displays the OMNI OUT screen.
7 Slot Setup icon (V2.0 and later) (page 34)
Displays the SLOT SETUP screen.
8 Recall Safe icon (page 38)
Displays the RECALL SAFE screen.
9 Mute Group icon (V4.0 and later) (page 39)
Displays the MUTE GROUP ASSIGN screen.
0 +48V Master button
Master button that turns the console's phantom power feature on and off. When this
button is turned off, phantom power will not be supplied to any channels, even if their
+48V buttons are turned on. (page 57)
A Brightness icon (page 40)
Displays the BRIGHTNESS screen.
B Network icon (page 41)
Displays the NETWORK screen.
C Time icon (page 42)
Displays the TIME screen.
D Log icon (page 42)
Displays the LOG screen.
E Help icon (page 43)
Displays the HELP screen.
F About icon (page 43)
Displays the ABOUT screen.
ձղ յն
պ
շչ
ճ
ջրտվսռ
ո
մ