User Manual

Toolbar
Reference Manual
TF series
- 25 -
PREFERENCE screen
Allows you to configure general operating settings regarding confirmation message display,
[SEL] key behavior, etc.
1 Auto CH Select section
INPUT/OUTPUT: When turned on, a channel of the corresponding type will be selected
automatically when you operate that channel's fader.
You can turn this feature on and off independently for input channels
and output channels.
[CUE] > [SEL] Link: When turned on, a channel will be selected when you turn its CUE
on.
[SEND SEL] > [CUE] Link (V4.0 and later): Specifies whether or not to link channel
selection to a cue in the SENDS ON FADER
mode.
Memorize [SEL] Position for Each FADER BANK: Determines whether channel
positions are remembered in fader
banks.
2 Confirmation section
Store/Recall: When turned on, a confirmation message is displayed when you store and
recall features.
INPUT Select/OUTPUT Patch: When turned on, a confirmation message is displayed
when you change the input selection or OMNI OUT
patching.
3 Help section
Help Language: Determines the language used when displaying the HELP screen.
Show Help at Startup: Determines whether the HELP screen is displayed automatically
after the console starts up.
ձ
ղ
ճ
մ
յ