User Manual

Toolbar
Reference Manual
TF series
- 26 -
4 Key Function section (V4.0 and later)
[TAP] Key Blink (V2.0 and later): Switches the flashing [TAP] key on or off. Tapped
tempos can be input even when the key is off.
[Home] Key (V4.0 and later): Displayed when the [Home] key is touched on the top
panel. Selects the section on the OVERVIEW screen. Each
touch of the [Home] key successively displays the next
section that is switched on.
5 Others section
Touch Sensing Area Optimization: Allows you to optimize the touchscreen's
sensitivity.
Stand: Optimized for operating the touchscreen
when you are positioned above it, such as
when standing.
Sit: Optimized for operating the touchscreen
when you are positioned below it, such as
when sitting.
Display Delay Scale (V2.5 and later): You can select the desired units (frames, meters,
feet, milliseconds) that are displayed in the
DELAY box for MATRIX and ST IN channels.
Frame Rate (V3.5 and later): Selects the frame rate (in numbers of frames) for the
delay setting.
RTA Offset (V3.6 and later): Adjusts the RTA sensitivity of the EQ and GEQ screens.
When this is touched, a screen for inputting numerical
values will appear.
USB 1/2 Output(V4.5 and later): Selects the signals to be output to channels 1 and 2
of the USB TO HOST connector.
Ch 1/2 Direct is the output before the fader, and ST
L/R, AUX, and MTRX are the outputs after the fader.
Configuring settings in the PREFERENCE screen
1. Use the buttons on the PREFERENCE screen to configure the settings as desired.
2. When finished, touch the close button ([X]).