User Manual

Toolbar
Reference Manual
TF series
- 27 -
USER DEFINED CONTROLS screen
This screen allows you to assign features to the [USER DEFINED KEYS], [USER DEFINED
KNOBS], and to the footswitch.
1 Keys button
Allows you to assign features to the [USER DEFINED KEYS] on the top panel.
2 Key setup buttons (A–F)
Touch the desired button to display the screen that allows you to assign features to the
corresponding key.
Features that can be assigned to [USER DEFINED KEYS]
FUNCTION PARAMETER1 PARAMETER2
Description
No Assign No feature is assigned
Automixer
Bypass Group a, Group b Bypasses the group assigned to PARAMETER 2.
Specific CH CH 1–8
Turns the Automixer on and off for the
channel assigned to PARAMETER 2.
Brightness Bank Change
Switches the brightness setting bank. This
feature is supported from V1.1.
CH ON Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB,
MATRIX1–4 (V2.5 and later)
Turns the channel assigned to PARAMETER 2
on and off.
ձճյղ
CH Select
Inc
Select channels in order of the direction
selected for PARAMETER 1.
Dec
Specific CH
CH 1–40,
ST IN 1L–ST IN 2R,
FX1L–FX2R,
AUX 1–8,
AUX 9–20,
STEREO L, STEREO R,
SUB,
MATRIX1–4 (V2.5 and later)
Selects the channel assigned to PARAMETER 2.
CUE Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB,
MATRIX1–4 (V2.5 and later)
Turns the cue on and off for the channel
assigned to PARAMETER 2.
Effect Bypass
FX 1, FX 2,
INS FX 1–6
Bypasses the effect assigned to PARAMETER 2.
EQ Band Select
HPF, LPF, Low, Low-Mid,
High-Mid, High
Selects the band assigned to PARAMETER 2.
(V3.0 and later)
Help Displays help information.
Meter Peak Hold ON Turns the peak hold on and off.
Monitor
Output Turns the monitor out on and off.
Source Select
STEREO, SUB,
STIN 1, STIN 2,
STIN (TF-RACK),
USB 33/34,
Playback
Selects the monitor source assigned to
PARAMETER 2.
Mute Master
MUTE GROUP 3–
MUTE GROUP 6
Turns the mute on and off for the MUTE
GROUP assigned to PARAMETER 1.
Oscillator
Oscillator On Turns the oscillator on and off.
Specific CH
AUX 1–20,
STEREO L, STEREO R,
SUB
Turns the oscillator sent to the channel
assigned to PARAMETER 2 on and off.
Page Change
Bookmark
Press and hold for more than 2 seconds to
bookmark the current screen. Press and hold
for less than two seconds to display the
bookmarked screen.
Bookmark with
“SEL”
The selected channel is saved with the
bookmark. Same as above.
Close Popup Closes the popup screen.
FUNCTION PARAMETER1 PARAMETER2
Description