User Manual

Toolbar
Reference Manual
TF series
- 28 -
3 Knobs button
Allows you to assign features to the [USER DEFINED KNOBS].
4 Knob setup buttons
Touch the desired button to display the screen that allows you to assign features to the
corresponding [USER DEFINED KNOBS].
Features that can be assigned to [USER DEFINIED KNOBS]
Recorder Transport
Play/Pause
Same as the Play/Pause button on the
RECORDER screen.
Stop
Same as the Stop button on the RECORDER
screen.
Next
Same as the Next button on the RECORDER
screen.
Previous
Same as the Previous button on the
RECORDER screen.
Rec
Same as the Rec button on the RECORDER
screen.
Auto Rec
Recording stops and the file is saved, and then
recording resumes immediately as a new file.
Rec & Start
Recording starts immediately without entering
record-ready mode.
SCENE
Inc Selects the next numbered Scene.
Dec Selects the previous numbered Scene.
Store
Assigns the current settings to selected Scene
number.
Recall Recalls the selected numbered Scene.
Inc Recall Recalls the next numbered Scene.
Dec Recall Recalls the previous numbered Scene.
Direct Recall/
Store
A00–99,
B00–99
Recalls the Scene number assigned to
PARAMETER 2. Press and hold for more than
two seconds to assign the current settings to
that Scene number.
FUNCTION PARAMETER1 PARAMETER2
Description
ճ
մ
Knob setup buttons
Features Description
No Assign No feature is assigned
Brightness
CH Name Adjusts the brightness of the CH NAME. (TF5/TF3/TF1 only)
CH Color Adjusts the brightness of the CH COLOR indicator. (TF5/TF3/TF1 only)
Screen Adjusts the brightness of the touchscreen.
Panel Adjusts the brightness of the panel LEDs.
CH Level Specific CH
Adjusts the level of the channel assigned to PARAMETER 2. (V3.0 and
later)
CH Select Inc/Dec Selects the channel. (V3.0 and later)
Monitor Level Adjusts monitor level.
Selected CH
Automixer Weight
AUTOMIXER Weight operations for the selected channel (V3.5 and
later)
CH Level Adjusts the level of the selected channel. (V3.0 and later)
Comp 1-knob/Thr
Adjusts 1-knob or threshold for the selected channel's COMP.
When 1-knob COMP is turned on, adjusts 1-knob; when 1-knob COMP
is turned off, adjusts threshold.
Digital Gain Adjusts the DIGITAL GAIN of the selected channel. (V3.0 and later)
EQ 1-knob/Gain
Adjusts 1-knob or gain for the selected channel's EQ.
When 1-knob EQ is turned on, adjusts 1-knob; when 1-knob EQ is
turned off, adjusts gain.
EQ Band Select Selects the band for the selected channel. (V3.0 and later)
EQ Frequency Adjusts EQ frequency for the selected channel.
EQ Q Adjusts EQ Q for the selected channel.
Gate Threshold Adjusts gate threshold for the selected channel.
HPF
Adjusts HPF for the selected channel.
Turn the knob to adjust the frequency.
Input Gain
Adjusts analog gain or digital gain for the selected channel.
When the channel's input is an analog source, adjusts analog gain.
When the channel's input is a digital source (i.e., USB, iPad, or STIN),
adjusts digital gain.
Send Level
Adjusts the send level to the bus selected for PARAMETER2 (FX, AUX,
SUB) for the selected channel. (V3.0 and later)
Pan/BAL Adjusts pan or balance for the selected channel.
RTA Offset Adjusts RTA Offset. (V3.6 and later)