User Manual

Toolbar
Reference Manual
TF series
- 31 -
Assigning a feature to a [USER DEFINED KNOB]
1. Touch the Knobs button.
The screen where you can select the
desired [USER DEFINED KNOB] is
displayed.
Buttons A–D correspond to [USER DEFINED KNOBS] A–D.
2. Touch the Knob button that corresponds to the [USER DEFINED KNOB] that you
want to configure.
The configuration screen is displayed.
3. Scroll through the Function list and select the desired feature.
4. Scroll through the Parameter 1 list and select the desired item.
If items are available in the Parameter 2 list, select the desired item.
5. Touch the OK button.
Assigning a feature to the footswitch
1. Touch the Foot Switch button.
2. Touch the Foot Switch setup button.
The configuration screen is displayed.
3. Scroll through the Function list and select the desired feature.
4. Scroll through the Parameter 1 list and select the desired item.
If items are available in the Parameter 2 list, select the desired item.
5. Touch the OK button.