User Manual

Table Of Contents

Toolbar

Reference Manual

TF series

OMNI OUT screen

Allows you to configure the output channels that are sent to the OMNI OUT jacks.

1 OMNI OUT1–16 buttons

Allows you to select which OMNI OUT jack will be configured.

The name of the channel currently assigned to each OMNI OUT jack is also displayed in

the buttons.

2 Output channel buttons

Determines which output channel or monitor output will be assigned to the OMNI OUT

jack you selected for

1. If you select None, nothing will be output to the corresponding

OMNI OUT jack.

OMNI OUT screen menu

Press the Menu key ( ) from the OMNI OUT screen to display the following items.

SLOT SETUP screen (V2.0 and later)

Displays settings and information related to the IO Rack Tio1608-D, DZR-D series powered

speaker system, DXS-XLF-D series powered subwoofer system that are connected to the

console via the NY64-D that is installed in the expansion slot.

The information that is displayed varies depending on the connection status of the each

device

and the Quick Config settings.

1 SLOT display area (V3.1 and later)

Displays the status of the expansion slot.

If no NY card is installed, "No Card" is displayed.

If an NY64-D is installed and Dante Device Lock has been enabled, a lock icon is

displayed.

1 Clear All

Clears all assignments for each OMNI OUT jack (all

will be set to None).

NOTE

Quick Config automatically configures essential settings, making it easy to connect the Tio1608-D, DZR-

D series, and DXS-XLF-D series. Quick Config automatically configures the Dante network settings and

audio signal patching for connections between one TF series console and up to a total of 24 Tio1608-D

interfaces (max. of 3), DZR-D series speakers and DXS-XLF-D series speakers.

For information about Tio1608-D, DZR-D series, and DXS-XLF-D series settings, refer to the

documentation for the each device.

ձղ

ճմ յ