User Manual

Toolbar
Reference Manual
TF series
- 35 -
If the NY64-D is operating in Dante AES67 mode, "AES67" is displayed above and to the
right of the SLOT display area.
When the NY64-D is installed and is pressed, the screen shown below will be
displayed to configure the settings for the NY64-D Dante Domain Manager, AES67
Mode and Device Lock (available from V3.6).
Dante Domain Manager
STATE: Displays the enrollment status of the Dante domain
LOCAL: Displays whether the Dante settings for the current device in operation
(including patches) can be modified
REMOTE:
Displays whether the Dante settings for the targeted remote device can be modified
AES67 MODE Displays the operating status of AES67 mode
Device Lock Displays whether Dante Device Lock is enabled
2 Device selection button (DZR button is V3.6 and later)
Switches between devices to show their information.
When displaying the Tio1608-D, use the Tio #1, Tio #2 and Tio #3 buttons to select the
Tio1608-D unit ID.
When displaying the DZR-D series and DXS-XLF-D series, select the DZR button.
When the connected Tio1608-D is operating in Dante AES67 mode, "AES67" will be
displayed to the upper right of the device selection buttons.
When an error occurs on a device, the error details will appear below the device
selection button.
If Dante Device Lock has been enabled for the device, a lock icon is displayed on the
Device selection button. (V3.1 and later)
3 Quick Config button
Turns the console's Quick Config feature on and off.
Displayed in gray when turned off, and white when turned on.
Displayed in orange if the Dante settings set by Dante Controller differ from the Quick
Config settings.
For information about Tio1608-D channel support when using Quick Config, see "Quick
Config Input and input channel relationships" (page 106).
The channels for the DZR-D series and DXS-XLF-D series that are patched when Quick
Config is used can be specified by selecting "Quick Config" in "UTILITY > DANTE SETUP
> MODE" on the DZR/DXS, and then PATCH.
If enrolled in the Dante domain, the Quick Config function is turned off.
NOTE
Dante Controller (v3.10.0.19 and later) is required in order for the NY64-D to operating in AES67 mode.
Domain Enrolled to the Dante domain.
Disconnected Enrolled to the Dante domain, but not connected to the DDM server.
Unmanaged Not enrolled to the Dante domain, but connected to the DDM server.
----- Not enrolled to the Dante domain or connected to the DDM server.
Read Write Can be modified.
Read Only Cannot be modified.
----- Not enrolled to the Dante domain or connected to the DDM server.
Operator Can be written.
Guest Can only be read. Cannot be modified.
None Cannot be written.
----- Not enrolled to the Dante domain or connected to the DDM server.
Disabled Not operating in AES67 mode.
Enable Operating in AES67 mode.
Unlocked Dante Device Lock is disabled.
Locked Dante Device Lock is enabled.
NOTE
• Dante Device Lock is a feature that prevents unintended operation. Dante Controller (v3.10.0.19 and
later) is required to use Dante Device Lock.
• Dante Controller (v3.10.0.19 and later) is required in order for the Tio1608-D to operate in AES67
mode.