User Manual

Table Of Contents

Toolbar

Reference Manual

TF series

RECALL SAFE screen

Allows you to configure which items are recalled and which items are not (i.e., recall safe)

when recalling Scenes and Presets.

"Recall safe" allows you to select certain parameters, channels, DCA groups, etc. whose

settings will not be replaced when recalling a Preset or Scene.

1 Channel selection buttons

Allows you to select which types of channels will be configured.

When you select a channel type, the different parameters that can be configured as

recall safe are displayed.

2 Parameter names

Touch the

button to turn SAFE parameters on and off for all channels of the same type.

The

button turns green when all SAFE parameters are turned on. If turned off for a parameter

on all channels, it is displayed in gray. Finally, if recall safe is turned on for a parameter

but not for all channels, the M button under the parameter name is displayed in blue.

3 Recall safe on/off buttons

Turns recall safe on and off for the corresponding parameter. When turned on, the

corresponding parameter is recall safe, i.e., its setting will not be changed when a Preset

or Scene is recalled.

For OMNI OUT assignments, recall safe can be turned on and off for OMNI OUT PATCH

only.

4 Channel information

Displays the channel ID, name, and icon.

Touch the SAFE button to turn safe recall on and off for the corresponding channel.

When turned on, parameters whose recall safe on/off buttons are in the "on" position

will not be recalled.

Using Recall safe function

1. Touch a channel selection button to select the channels or DCA groups that you

want to configure for recall safe.

2. Touch the recall safe on/off buttons

according to the items you want to make

recall safe.

3. Touch the SAFE buttons for each channel

to enable or disable the settings you

made above.

4. Touch the [X] button to close the screen,

and proceed to recall the desired Preset

or Scene.

Recall safe on/off buttons

SAFE buttons