User Manual

Table Of Contents

OVERVIEW screen

Reference Manual

TF series

SELECTED CHANNEL section (V4.0 and later)

CH1–CH32

1 Displays the FX1 screen. (page 67)

2 Displays the FX2 screen. (page 67)

3 Displays the SEND TO AUX screen. (page 73)

4 Displays the ASSIGN screen. (page 74)

5 Displays the CH VIEW screen. (page 76)

6 Displays the HA status.

You can adjust the gain by touching to highlight it, and then turning the [TOUCH AND

TURN] knob.

Touch when highlighted to display the INPUT screen. (page 57)

Two HAs are displayed on channels for which the stereo link is configured.

7 Displays the ON/OFF status for the input port and DIRECT OUT.

8 Displays the AUTOMIXER screen. (page 74)

9 Displays the LIBRARY screen. (page 8)

0 Controls the channel EQ.

The button switches between 1-knob and manual modes.

Select the 1-knob EQ mode type and switch between filter types on the EQ screen.

Touch the icon to display the EQ screen. (page 59)

A Configures the GATE for the channel.

Touch the icon to display the GATE screen. (page 63)

B Configures the COMP for the channel.

The button switches between 1-knob and manual modes.

Touch the icon to display the COMP screen. (page 65)

CH33–CH40

1 Displays the FX1 screen. (page 67)

2 Displays the FX2 screen. (page 67)

3 Displays the SEND TO AUX screen. (page 73)

4 Displays the ASSIGN screen. (page 74)

5 Displays the CH VIEW screen. (page 76)

6 Displays the HA status.

You can adjust the gain by touching to highlight it, and then turning the [TOUCH AND

TURN] knob.

Touch when highlighted to display the INPUT screen. (page 57)

7 Displays the input port.

8 Displays the LIBRARY screen (page 8).

NOTE

In the EQ, GEQ, GATE and COMP of the SELECTED CHANNEL section, operations can be performed

either by dragging or by touching the given parameter to highlight it and then operating the [TOUCH AND

TURN] knob.

նշոչ

նշ ո