User Manual

Configuration screens
Reference Manual
TF series
- 66 -
COMP screen menu
Press the Menu key ( ) from the COMP screen to display the following options.
Setting the compressor
1. Display the COMP screen. (page 5)
2. If the compressor is turned off, touch the COMP button
to turn compression on.
3. Touch the 1-knob button and turn 1-knob COMP mode off.
4. Adjust the desired slider.
Drag the sliders to adjust each parameter.
When you touch an item, you can also use the [TOUCH AND TURN] knob to adjust the setting.
Adjusting the compressor in 1-knob COMP mode
1. Turn 1-knob COMP mode on.
2. Turn the [TOUCH AND TURN] knob.
Attack, Release, and Knee settings are fixed at their current settings, and the Threshold, Ratio, and
Out Gain settings are adjusted automatically.
1 Copy
Copies the COMP parameters of the selected
channel to the clipboard.
2 Paste
Pastes the COMP parameters in the clipboard to
the selected channel.
3 Compare
Allows you to compare the COMP parameters of
the selected channel with the COMP parameters
in the clipboard by switching between the two.
4 Default
Resets the COMP settings for the current channel
to their default values.
ձ
ղ
ճ
մ