User Manual

Configuration screens
Reference Manual
TF series
- 69 -
Effect parameters
REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One-input, two-output hall, room, stage, and plate reverbs.
MONO DELAY
One-input, two-output basic repeating-type delay.
STEREO DELAY
Two-input, two-output basic stereo delay.
DELAY LCR
One-input, two-output 3-tap delay.
ECHO
Two-input, two-output stereo delay with a crossed feedback loop.
Parameter Range Description
Reverb Time 0.3s–20.0s Determines the length of the reverberation.
Initial Delay 1.0ms–500.0ms
Determines the amount of time that passes before the initial
reverberation is heard.
High Ratio 0.1–1.0 Ratio of high frequency reverberations to the Reverb Time.
Diffusion 0–10 Left and right spread of the reverberation.
Density 0% – 100% Density of the reverberation.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Parameter Range Description
Delay 1.0ms–2700.0ms Delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note ----, ~ Value used to calculate the delay time based on the tempo.
Parameter Range Description
Delay L 1.0ms–1350.0ms Left channel delay time.
Delay R 1.0ms–1350.0ms Right channel delay time.
Feedback Gain L -99 – +99 Left channel feedback gain.
Feedback Gain R -99 – +99 Right channel feedback gain.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note L
----, ~
Value used to calculate the left channel delay time based on the
tempo.
Note R
----, ~
Value used to calculate the right channel delay time based on
the tempo.
Parameter Range Description
Delay L 1.0ms–2700.0ms Left channel delay time.
Delay C 1.0ms–2700.0ms Center channel delay time.
Delay R 1.0ms–2700.0ms Right channel delay time.
Delay FB 1.0ms–2700.0ms Feedback delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Level L -100 – +100 Left channel level.
Level C -100 – +100 Center channel level.
Level R -100 – +100 Right channel level.
Sync Off, On Delay time tempo sync.
Note L
----, ~
Value used to calculate the left channel delay time based on the
tempo.
Note C
----, ~
Value used to calculate the center channel delay time based on
the tempo.
Note R
----, ~
Value used to calculate the right channel delay time based on
the tempo.
Note FB
----, ~
Value used to calculate the delay feedback time based on the
tempo.
Parameter Range Description
Delay L 1.0ms–1350.0ms Left channel delay time.
Delay R 1.0ms–1350.0ms Right channel delay time.
Delay FB L 1.0ms–1350.0ms Left channel feedback delay time.
Delay FB R 1.0ms–1350.0ms Right channel feedback delay time.
Feedback Gain L -99 – +99 Left channel feedback gain.
Feedback Gain R -99 – +99 Right channel feedback gain.
XFeedback Gain -99 – +99 Left-to-right, right-to-left feedback gain.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note L
----, ~
Value used to calculate the left channel delay time based on the
tempo.
Note R
----, ~
Value used to calculate the right channel delay time based on
the tempo.
Note FBL
----, ~
Value used to calculate the left channel feedback delay time
based on the tempo.
Note FBR
----, ~
Value used to calculate the right channel feedback delay time
based on the tempo.