User Manual

Configuration screens
Reference Manual
TF series
- 72 -
PING PONG DELAY (V2.0 and later)
One-input, two-output ping pong delay. The delayed sound alternates between left and right
at equal intervals.
DUAL PITCH (V2.0 and later)
Two-input, two-output pitch-shift effect.
OUTPUT DELAY (V2.5 and later)
Two-input, two-output single delay. When used for INS FX 1–6, this delay is good for delay
compensation.
*1 frame rate=24: 0.03 - 24.00,
frame rate=25: 0.03 - 25.00,
frame rate=29.97D/29.97: 0.03 - 29.97
frame rate=30D/30: 0.03 - 30.00
Set the frame rate in "Frame Rate", on the "Others" section (page 26) of the PREFERENCE screen.
Parameter Range Description
Delay 1.0ms - 1350.0ms Delay time.
Feedback Gain -99% - 99% Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Parameter tempo sync.
Note ----, - Value used to calculate the delay time based on the tempo.
Parameter Range Description
Pitch 1 -24 - 24 Pitch of Ch1 (semitone increments).
Fine 1 -50 - 50 Pitch of Ch1 (1 cent increments).
Level 1 -100 - 100 Volume of Ch1.
Pan 1 L63 - R63 Pan of Ch1.
Delay 1 1.0ms - 1000.0ms Delay time of Ch1.
Feedback Gain 1 -99 - 99 Feedback level of Ch1.
Pitch 2 -24 - 24 Pitch of Ch2 (semitone increments).
Fine 2 -50 - 50 Pitch of Ch2 (1 cent increments).
Level 2 -100 - 100 Volume of Ch2.
Pan 2 L63 - R63 Pan of Ch2.
Delay 2 1.0ms - 1000.0ms Delay time of Ch2.
Feedback Gain 2 -99 - 99 Feedback level of Ch2.
Mode 1 - 10 Width of pitch shift.
Sync Off, On Parameter tempo sync.
Note 1 ----, - Value used to calculate Delay 1 based on the tempo.
Note 2 ----, - Value used to calculate Delay 2 based on the tempo.
Parameter Range Description
LR LINK On, Off Links the left and right delays.
Delay
0.3 – 343.6 meter
1.1 – 1127.3 feet
1.00 – 1000.00ms
0.03 – 30.00 frame
*1
Delay time is set in units of frames (V3.5 and later), meters, feet,
or ms (milliseconds).