User Manual

ManualsBrandsYamaha ManualsMixersDigital Mixing Console

Table Of Contents

Configuration screens

Reference Manual

TF series

1 AUTOMIXER ON button

Turns the AUTOMIXER on/off for the respective channel.

2 Level indicator

Use this indicator to check whether the input gain going into the AUTOMIXER is

appropriate.

Off: No input signal, or not enough input level

Lighted green: Input gain is appropriate

Lighted red: Overload input

3 Automix gain meter

Displays the gain that was adjusted using the AUTOMIXER.

4 Weight indicator

Displays the value that was set in the

5 Weight text box as a bar graph.

5 Weight text box

Adjusts the signal level inputted into the AUTOMIXER side chain. When this is set to the

same value as other channels, the gain of audio signals that are inputted at the same

time will be equally distributed. When this value is increased, the gain of audio signals

that are inputted at the same time will be distributed to create a louder sound compared

with other channels.

Setting range: -100.0 dB, -29.5 dB–0.0 dB (default setting)–15.0 dB

6 Group selection button

Selects whether to assign either AUTOMIXER group a or b. You can use groups to

independently create two types of mixes. The background color changes according to

the group selected.

7 Group Bypass a/b buttons (V4.0 and later)

Turns the Automixer function bypass on/off for each group.

NOTE

We recommend that you leave the AUTOMIXER off for audio that does not contain speech

components, such as live concerts.

NOTE

Adjust the input gain using the analog gain, digital gain and faders for each input channel.

Setting the AUTOMIXER

1. Display the AUTOMIXER screen for CH1–CH8.

2. Turn the channel on that will be inputted into the

AUTOMIXER.

3. Touch the group selection button to select the

group to which each channel is assigned.

4. Adjust the input level for each channel using the

analog gain and faders, so that the level indicators are green.

5. Touch the weight setting boxes for each channel; and with the focus set on the box,

turn the [TOUCH AND TURN] knob to adjust the relative sensitivity between

channels.

6. Adjust the weight further as necessary while inputting audio, in order to balance the

sound between the channels.