User Manual

Configuration screens
Reference Manual
TF series
- 85 -
GEQ screen
You can use the internal graphic equalizer (GEQ) to process AUX 1–8 and STEREO channel signals.
The GEQ is a mono, 12-band EQ. Each band is 1/3 octave wide, with an adjustable gain range
of ±15 dB.
31 bands are available; you can adjust gain for up to 12 bands.
1 GEQ button
Turns the GEQ on and off.
2 GEQ channel selection buttons
These buttons are displayed only when configuring the GEQ for stereo AUX buses or the
STEREO channels.
They are not displayed for mono AUX buses.
: Turns the GEQ left/right channel link on and off.
L/R: Allows you select the left and right GEQ channels.
3 Recall Safe button
Displays the RECALL SAFE screen. (page 38)
4 Fader Assign button (V2.0 and later)
This feature is available for TF5/TF3/TF1.
When this button is turned on, you can use the faders to adjust each band of the GEQ.
5 EQ graph, RTA display, band selection
Displays the EQ settings with RTA (real-time analysis).
Swipe left or right or touch an area to display the gain sliders for other bands.
When the Fader Assign button is turned on, you can use this area to change which
bands can be adjusted by the faders. (TF3 and TF1 only.)
6 Gain slider
Adjusts the gain for the corresponding band.
Swipe left or right to display the gain sliders for other bands.
When the Fader Assign button is turned on, you can use this area to change which
bands can be adjusted by the faders. (TF3 and TF1 only.)
7 Output level meter
Displays the GEQ output level.
8 Available bands display
Displays the number of additional bands that you can adjust.
ձղ ճ մ
ն
շ
յ
ո
NOTE
Adjusts the sensitivity of RTA for RTA Offset on the PREFERENCE screen (  page 26). Allocate the RTA
Offset to the USER DEFINED KNOBS to adjust while the GEQ screen is displayed (available from V3.6).