User Manual

Configuration screens
Reference Manual
TF series
- 86 -
GEQ screen menu
Press the Menu key ( ) from the GEQ screen to display the following options.
Using GEQ
1. Touch the GEQ button to turn GEQ on.
2. Swipe left or right on the gain sliders to display the
desired bands.
3. Drag sliders up and down to adjust the gain of the corresponding bands.
You can confirm the overall output using the output level meter.
Once you have adjusted gain for 12 bands, the gain sliders for the remaining bands are displayed in
gray. If you want adjust gain for other bands, you must first set the gain to 0 for one of the bands you
have already adjusted.
Touch the gain slider quickly two times to reset it to its default value (0 dB).
Selected gain settings can also be specified using the [TOUCH AND TURN] knob.
The [TOUCH AND TURN] knob functionality can be switched ON/OFF by pressing the [Shift] key.
Each press of the [Shift] key switches between setting gain and selecting the band. The same action
can be achieved by pressing the [TOUCH AND TURN] knob.
Holding down the [Shift] key resets the gain value for the selected band to zero decibels (default
value) (V4.0 and later).
Gain slider Output level meter
Using faders to adjust GEQ (TF5/TF3/TF1)
1. Touch the Fader Assign button to turn it on.
The current gain setting for each band is applied to the faders
in the channel strip section of the console.
You can confirm the frequency and gain for each band in the channel display.
2. For TF3 and TF1, swipe left or right on the gain sliders in the GEQ screen to select
other bands.
You can swipe the EQ graph, RTA display, or band selection area left or right to select other bands.
For TF5, all bands are applied to the faders.
3. Use the console's faders to adjust the gain.
If you turn on a channel's [ON] key, you can reset the gain of frequencies assigned to that channel to
0 dB.
4. When you are finished making adjustments, touch the Fader Assign button to turn
it off.
Fader Assign also turns off when you switch another screen or enter SENDS ON FADER mode.
1 Copy
Copies the GEQ parameters of the selected
channel to the clipboard.
2 Paste
Pastes the GEQ parameters in the clipboard to the
selected channel.
3 Compare
Allows you to compare the GEQ parameters of the
selected channel with the GEQ parameters in the
clipboard by switching between the two.
4 Default
Resets the GEQ settings for the current channel to
their default values.
ձ
ղ
ճ
մ