User Manual

ManualsBrandsYamaha ManualsMixersDigital Mixing Console

Table Of Contents

Configuration screens

Reference Manual

TF series

OUTPUT screen

Allows you to configure how output channels will be output. The buttons displayed vary

depending on the type of output channel selected.

○

: Displayed

– : Not displayed

1 ST button

Determines whether the stereo channel is output or not.

2 SUB button (V3.0 and later)

Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus.

3 SUB slider (V3.0 and later)

Determines the amount of signal sent from the selected channel to the SUB bus.

4 Out Gain text box

Allows you to adjust the output gain.

When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch

again to display the keyboard and enter a value.

5 Φ (phase) button

Allows you to reverse the phase.

When turned on, the output signal's phase is reversed.

6 OMNI OUT button

Displays the number of the OMNI OUT to which the channel is directed.

Up to two numbers can be displayed. For three or more numbers, "+" is displayed.

Displays the OMNI OUT screen. (page 34)

For information about channels and output ports, see "Quick Config Input and input

channel relationships" (page 106).

7 Recall Safe button (V1.1 and later)

Turns recall safe on and off for the corresponding channel.

You can display the RECALL SAFE screen by touching the jump button in the right corner

of the Recall Safe button.

Output channel

Buttons

ST button

SUB button

SUB slider

Out Gain

Buttons

Φ button

OMNI OUT

Indicator

OMNI OUT

Buttons

AUX 1–8 – –

○○ ○ ○

AUX9/10–AUX19/20

○○○○○○

SUB – –

○○ ○ ○

STEREO – –

○○ ○ ○

MATRIX1–4 – –

○○ ○ ○

շմ

նյ