User Manual

Configuration screens
Reference Manual
TF series
- 88 -
SEND FROM screen
Allows you to send signals from the each channels.
1 ON button
Determines whether a signal is sent (on) or not sent (off) from the corresponding each
channel.
2 Send pan slider
Adjusts the pan of the input channel signal that is sent.
For AUX1–AUX8 and MATRIX1–MATRIX4, this is displayed only if the signal type is set
to STEREO.
Not displayed for FX1L–FX2R.
3 Send level slider
Determines the amount of signal sent from the corresponding each channel.
4 Pre button
Allows you to select whether the signal sent from the input channel is from before or
after the fader.
On: Before the fader
Off: After the fader
Not displayed for MATRIX 1–4.
ձ
ճ
ղ
մ
Adjusting the SEND FROM level
1. Touch the ON button for the input channels
that you want to send.
2. Touch the send pan slider, and then use the
[TOUCH AND TURN] knob to adjust the pan
of the input channel signal that is sent.
3. Drag the send level sliders to adjust the
amount of input channel signal that is sent.
Send level slider
Send pan slider
ON button
Pre button