User Manual

Table Of Contents

Configuration screens

Reference Manual

TF series

DCA roll out

You can assign DCA groups 1–8 to the last 8 channel strips on the right side of the console's

top panel.

(TF5: channel strips 25–32; TF3: 17–24; TF1: 9–16)

You can then assign the channels of a DCA group to the channel strips on the left side of the

console's top panel by pressing the corresponding DCA group's [SEL] key.

(TF5: channel strips 1–24; TF3: 1–16; TF1: 1–8)

The number of channels in the group that will be assigned to the channels strips depends on

the model number. For the TF5 console, the 24 lowest numbered channels in the group are

assigned; the lowest 16 for the TF 3, and the lowest 8 for the TF1.

This feature allows you to manipulate the channels strips for both the DCA group master and

the group's "member" channels at the same time.

NOTE

For TF-RACK, this item is displayed only in the OVERVIEW screen. The channels assigned to the faders

are the same as for the TF1.

Member channels of selected DCA group

assigned to these channel strips

DCA groups 1–8

assigned to these

channel strips