User Manual

Table Of Contents

Configuration screens

Reference Manual

TF series

DELAY screen (V2.5 and later)

Sets the delay for signals output from MATRIX channels and the delay for signals input to the

ST IN channel (V4.0 and later).

1 DELAY button

Turns the DELAY on and off.

2 Display selection button (V3.5 and later)

When a MATRIX channel is set to "Stereo", select the MATRIX channel that will display

the parameters.

Two buttons are always displayed for the ST IN channel (V4.0 and later).

3 LR Link button (V3.5 and later)

If the MATRIX channel is set to stereo, the DELAY on/off and delay time operations for

the left/right channels will be linked together when this is turned on. When the delay

times are set to a different value, the delay times will operate in linked mode,

maintaining the time difference.

The LR Link button is always displayed for the ST IN channel (V4.0 and later).

4 DELAY slider

Allows you to adjust the delay time.

Delay time is displayed in frames, meters, feet, or ms (milliseconds).

5 DELAY setting

Determines the delay time by specifying frames, distance (meters or feet) or time

(milliseconds). Touch a text box to display the keyboard and enter a value.

NOTE

For MATRIX channels, this button is displayed only when the channel is set to stereo. Switch between

Stereo and MONOx2 using the BUS SETUP screen, located in the SETUP screen. (page 33)