User Manual

Table Of Contents

Maintenance screen

Reference Manual

TF series

Input Port Trim screen

Allows you to adjust the gain of each INPUT jack in 0.01 dB increments.

1 INPUT jack selection buttons

Select the INPUT jack that you want to configure here.

Select the button that corresponds to the INPUT jack you want to configure, and then

use the [TOUCH AND TURN] knob to adjust the value.

After making adjustments, start up the console as usual.

2 Reset All button

Resets all values to 0.00 dB. The factory default setting is also 0.00 dB.

Touch to display the confirmation message. Touch the OK button to perform the

operation.

Output Port Trim screen

Allows you to adjust the gain of each OMNI OUT jack in 0.01 dB increments.

1 OMNI OUT jack selection buttons

Select the OMNI OUT jack that you want to configure here.

Select the button that corresponds to the OMNI OUT jack you want to configure, and

then use the [TOUCH AND TURN] knob to adjust the value.