User Manual

Maintenance screen
Reference Manual
TF series
- 97 -
Channel Color Calibration screen (TF5/TF3/TF1)
You can adjust the colors of the LEDs as desired. LED colors are adjusted one at a time.
1 Color buttons
Allow you to select a color.
2 RGB knobs
Allow you to adjust the color.
3 Apply button
Applies the settings and exits.
4 Reset All button
Starts the calibration.
Touch to display the confirmation message. Touch the OK button to perform the
operation.
ղճմ
ձ
Adjusting channel colors
1. Press the [SEL] key on the top panel that corresponds to the channel color you want
to adjust.
2. Touch a color button to choose a color.
3. While comparing the [SEL] you selected with the other indicators on the top panel,
use the [TOUCH AND TURN] knob or the [USER DEFINED KNOBS] B, C, and D to
adjust the color.
4. When finished, touch the Apply button to apply the settings.
5. Touch the Exit button in the maintenance menu and start up the console as usual.
NOTE
• For TF3 and TF1, channels not supported by the console are not displayed.
• Only one channel color can be adjusted at a time.
• The Apply button is only displayed after you begin adjusting the channel's color.
• To reset all channel color's to their factory default values, touch the Reset All button.
• When the reset is complete, you can continue to use other maintenance features without exiting.