User Manual

Screen areas
User's Guide
TF StageMix
- 18 -
A INPUT Select
When this item is turned on, a confirmation message is displayed when you change the input source on the INPUT screen.
CH SELECT area
B StageMix Follows Console
Determines whether the channel you select on the console is also selected in StageMix.
C Console Follows StageMix
Determines whether the channel you select in StageMix is also selected on the console.
METERS area
D Input Meter Point
Determines the input level metering point.
Pre HPF: After the head amp; before the HPF
Pre Fader: Before the fader
Post On: After the [ON] key
E Output Meter Point
Determines the output level metering point.
Pre EQ: Before the EQ
Pre Fader: Before the fader
Post On: After the [ON] key
RTA area
F Peak Hold Mode
Determines the type of peak hold displayed for RTA.
Freeze: The RTA display freezes when you turn the Hold button on. The display refreshes when you turn the Hold button
off.
All Peaks: The maximum value of all RTA frequency bands are displayed in red.
High Peak: The one frequency band with the highest value is displayed in red.
G Input Gain
Allows you to adjust the mic input gain of the iPad used for RTA.
Available settings: -24dB, -12dB, 0dB, 12dB, 24dB
H Number of Bands
Determines the number of frequency bands displayed by RTA.
Available settings: 61-band, 121-band
LICENSE screen
Displays license information about the software used by the StageMix app.