User Manual

Toolbar
User’s Guide
TF Editor
- 16 -
METER screen
Displays the input and output level of all the channels, and allows you to select the metering point (i.e., the point at which the level
is detected) of the level meter.
1 Input metering point selection menu
Determines the input level metering point.
PRE HPF: After the head amp; before the HPF
PRE FADER: Before the fader
POST ON: After the [ON] key
2 Output metering point selection menu
Determines the output level metering point.
PRE EQ: Before the EQ
PRE FADER: Before the fader
POST ON: After the [ON] key
3 Peak Hold button
Turn this button on to hold the peak level for each level meter. Turn this button off to remove the peak level that was being held.
The Peak Hold on/off setting affects both input and output channels.
4 Meters
Display the channel levels.
5 Meter display selection button
Allows you to select how many meters
are displayed.
Three display modes are available.
ձղճ
մ
յ