User Manual

Toolbar
User’s Guide
TF Editor
- 22 -
RECALL SAFE screen
Allows you to configure which items are recalled and which items are not (i.e., recall safe) when recalling Scenes and Presets.
"Recall safe" allows you to select certain parameters, channels, DCA groups, etc. whose settings will not be replaced when recalling
a Preset or Scene.
1 Channel selection buttons
Allows you to select which types of channels will be configured.
When you select a channel type, the different parameters that can be configured as recall safe are displayed.
2 Parameter names
Click  to turn recall safe on and off for the corresponding parameters for all channels.
When recall safe is turned on for a parameter on all channels, the  mark under the parameter name is displayed in green.
If turned off for a parameter on all channels, it is displayed in gray. Finally, if recall safe is turned on for a parameter but not
for all channels, the  mark under the parameter name is displayed in blue.
3 Recall safe on/off buttons
Turns recall safe on and off for the corresponding parameter. When turned on, the corresponding parameter is recall safe,
i.e., its setting will not be changed when a Preset or Scene is recalled.
For OMNI OUT assignments, recall safe can be turned on and off for all OMNI OUT jacks, but not for individual jacks.
4 Channel information
Displays the channel ID, name, and icon.
Click the SAFE button to turn recall safe on and off for the corresponding channel.
When turned on, parameters whose recall safe on/off buttons are in the "on" position will not be recalled.
ձ
ղ
ճ
մ