User Manual

Toolbar
User’s Guide
TF Editor
- 24 -
USER DEFINED CONTROLS screen
This screen allows you to assign features to the [USER DEFINED KEYS], [USER DEFINED KNOBS], and to the footswitch.
1 Keys button
Allows you to assign features to the [USER DEFINED KEYS] on the console's top panel.
2 Key setup buttons (A–F)
Click the desired button to display the screen that allows you to assign features to the corresponding USER DEFINED KEY.
Features that can be assigned to USER DEFINED KEYS
FUNCTION PARAMETER 1 PARAMETER 2
Description
No Assign No feature is assigned.
Automixer
Bypass Group a, Group b Bypasses the group assigned to PARAMETER 2.
Specific CH CH 1–8 Turns the Automixer on and off for the channel assigned to PARAMETER 2.
Brightness Bank Change Switches between the brightness banks.
CH ON Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB,
MATRIX1–4
Turns the channel assigned to PARAMETER 2 on and off.
CH Select
Inc
Select channels in order of the direction selected for PARAMETER 1.
Dec
Specific CH
CH 1–40,
ST IN 1L–ST IN 2R,
FX 1L–FX 2R,
AUX 1–8,
AUX 9–20,
STEREO L, STEREO R,
SUB,
MATRIX1–4
Selects the channel assigned to PARAMETER 2.
CUE Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB,
MATRIX1–4
Turns the cue on and off for the channel assigned to PARAMETER 2.
Effect Bypass
FX 1, FX 2,
INS FX 1–6
Bypasses the effect assigned to PARAMETER 2.
EQ Band Select
HPF, LPF, L ow, Low- Mi d,
High-Mid, High
Selects the band assigned to PARAMETER 2.
Help Displays help information.
Meter Peak Hold ON Turns the peak hold on and off.
ձճյղ