User Manual

Toolbar
User’s Guide
TF Editor
- 25 -
3 Knobs button
Allows you to assign features to the [USER DEFINED KNOBS] on the console's top panel.
4 Knob setup buttons
Click the desired button to display the screen that allows you to assign features to the corresponding USER DEFINED KNOB.
Features that can be assigned to USER DEFINED KNOBS
Monitor
Output Turns the monitor out on and off.
Source Select
STEREO, SUB,
ST IN 1, ST IN 2,
STIN (TF-RACK),
USB 33/34,
Playback
Selects the monitor source assigned to PARAMETER 2.
Mute Master
MUTE GROUP 3–
MUTE GROUP 6
Turns the mute on and off for the MUTE GROUP assigned to PARAMETER 1.
Oscillator
Oscillator On Turns the oscillator on and off.
Specific CH
AUX 1–20,
STEREO L, R,
SUB
Turns the oscillator sent to the channel assigned to PARAMETER 2 on and off.
Page Change
Bookmark
Click and hold for more than 2 seconds to bookmark the current screen. Click and hold
for less than two seconds to display the bookmarked screen.
Bookmark with “SEL” The selected channel is saved with the bookmark. Same as above.
Close Popup Closes the popup screen.
Recorder Transport
Play/Pause Same as the Play/Pause button on the RECORDER screen.
Stop Same as the Stop button on the RECORDER screen.
Next Same as the Next button on the RECORDER screen.
Previous Same as the Previous button on the RECORDER screen.
Rec Same as the Rec button on the RECORDER screen.
Auto Rec
Recording stops and the file is saved, and then recording resumes immediately as a new
file.
Rec & Start Recording starts immediately without entering record-ready mode.
SCENE
Inc Selects the next numbered Scene.
Dec Selects the previous numbered Scene.
Store Stores the current settings to selected Scene number.
Recall Recalls the selected numbered Scene.
Inc Recall Recalls the next numbered Scene.
Dec Recall Recalls the previous numbered Scene.
Direct Recall/Store
No. A00–99,
No. B00–99
Recalls the Scene number assigned to PARAMETER 2. Click and hold for more than two
seconds to store the current settings to that Scene number.
Features Description
No Assign No feature is assigned.
Brightness
CH Name Adjusts the brightness of channel name. (TF5/TF3/TF1 only)
CH Color Adjusts the brightness of the channel color indicator. (TF5/TF3/TF1 only)
Screen Adjusts the brightness of the touch screen.
Panel Adjusts the brightness of the panel LEDs.
CH Level Specific CH Adjusts the level of the channel assigned to PARAMETER 2.
CH Select Inc/Dec Selects the channel.
Monitor Level Adjusts monitor level.
FUNCTION PARAMETER 1 PARAMETER 2
Description
ճ
մ
Knob setup buttons