Manualshelf

User Manual

ManualsBrandsYamaha ManualsMixersDigital Mixing Console
31323334353637383940
Main display area
User’s Guide
TF Editor
-
38
-
SELECTED CHANNEL screen
CH1–CH32
1 Displays the FX1 screen (page 55).
2 Displays the FX2 screen (page 55).
3 Displays the SEND TO AUX screen (page 62).
4 Displays the ASSIGN screen (page 63).
5 Displays the CH VIEW screen (page 66).
6 Displays the HA status.
You can adjust the gain by clicking the text box to highlight it, and then use your mouse wheel to adjust the setting.
Click when highlighted to display the INPUT screen (page 45).
Two HAs are displayed on channels for which the stereo link is configured.
7 Displays the ON/OFF status for the input port and DIRECT OUT.
Click to display the CH VIEW screen (page 66).
8 Displays the AUTOMIXER screen (page 64).
9 Displays the LIBRARY screen (page 30).
0 Controls the channel EQ.
The button switches between 1-knob mode and manual mode.
Select the 1-knob EQ mode type and switch between filter types on the EQ screen.
Click the icon to display the EQ screen (page 48).
A Configures the GATE for the channel.
Click the icon to display the GATE screen (page 51).
B Configures the COMP for the channel.
The button switches between 1-knob mode and manual mode.
Click the icon to display the COMP screen (page 53).
NOTE
In the EQ, GEQ, GATE and COMP sections of the SELECTED CHANNEL screen, you can use drag and drop, as well as clicking on each parameter
and then adjusting the settings using the mouse wheel, with the parameter highlighted.
ձ
ղ
ճ
մ
յ
նշոչ
ջ
ռ
պ