User Manual
Main display area
User’s Guide
TF Editor
-
45
-
INPUT screen
Allows you to change the stereo link setting, select an input source, turn phantom power on and off, turn phasing on and off, and
adjust input gain.
1 Stereo link selection button
Allows you to select whether two adjacent mono input channels are linked as a stereo pair, or behave as two separate mono
channels.
Click to display the popup menu.
OFF: Stereo link is disabled.
CH1&2: Stereo link is enabled. When stereo link is enabled, the odd numbered channel is the left side of the stereo pair, and
the even numbered one is the right. The channel numbers displayed in the popup menu depend on the channel
whose settings you are editing.
CH2&3: Stereo link is enabled. When stereo link is enabled, the even numbered channel is the left side of the stereo pair, and
the odd numbered one is the right. The channel numbers displayed in the popup menu depend on the channel
whose settings you are editing.
2 Input selection buttons
Allows you to select the channel's input source (input port). The available sources depend on the channel whose settings you
are editing.
INPUT: The device connected to the INPUT jack will be used as the input source.
USB: The computer connected to the USB TO HOST connector will be used as the input source.
SLOT: Allows you to select an input from the NY64-D installed in the expansion slot. Use this button when selecting an
input from a Tio1608-D or stage box connected to the NY64-D and the Dante network.
Playback: Displayed for ST IN1. Allows you to select a USB storage device that is connected to the USB connector on the
front panel as an input.
NOTE
When USB is selected, the gain slider (7) adjusts digital gain, and the +48V button (8) is not displayed.
When SLOT is selected, analog gain adjustment and the +48V button cannot be used if the HA Control button on the SLOT SETUP screen is not
turned on. Additionally, for inputs from a device whose head amp cannot be controlled, the gain slider (
7) becomes a digital gain adjustment, and
the +48V button (
8) is not displayed.
ձղ ճմ
յ
նշո