User Manual

Main display area
User’s Guide
TF Editor
- 47 -
9 Gain Unlink button
Displayed for stereo channels and for channels that have stereo link turned on.
While you are holding the button down, gain for the left and right channels can temporarily be adjusted individually. When
you release the button, the gain for both channels can be adjusted together but the difference in gain between the two
channels is maintained. To adjust a channel's gain, click the gain slider of the corresponding channel and then rotate the
mouse wheel while holding down the Gain Unlink button.
Input screen menu
The following items are displayed in the menu area when the INPUT screen is displayed.
1 All INPUT
Allows you to assign the INPUT jacks as the input source for all input channels.
2 All USB
Allows you to assign the USB TO HOST connector as the input source for all input
channels.
3 All SLOT
Switches all inputs to input sources of Dante network devices that are connected to the
NY64-D installed in the expansion slot.
The input source for the following channels will be changed.
TF5:
CH 1–32 (when CH 1–32 are selected)
CH 33–40 (when CH 33–40 are selected)
TF3:
CH 1–24 (when CH 1–24 are selected)
CH 25–32 (when CH 25–32 are selected)
CH 33–40 (when CH 33–40 are selected)
TF1/TF-RACK:
CH 1–16 (when CH 1–16 are selected)
CH 17–32 (when CH 17–32 are selected)
չ
ձ
ղ
ճ