User Manual

Main display area

User’s Guide

TF Editor

6 EQ output level meter

Displays the EQ output level.

7 EQ graph

Displays the parameter settings of the EQ and filter. As you adjust the settings of each band, the results are reflected in the

graph.

When using 1-knob EQ mode, you can adjust the 1-knob level slider.

When using manual mode, you can drag the handles displayed in the graph to adjust the corresponding settings. When HPF

is turned on, you can drag the HPF handle to adjust the cutoff frequency. You can also adjust HPF independently when using

the Intensity type for 1-knob EQ mode.

<1-knob EQ mode> <Manual mode>

How does 1-knob EQ mode work?

1-knob EQ mode allows you to adjust several parameters at once with just one operation. It makes EQ adjustment quick and easy.

The console contains Presets that are configured for a variety of instruments. You can use 1-knob EQ mode to adjust the EQ

settings that are saved in Presets without disturbing the overall balance of your mix.

You can even configure EQ settings using manual mode, then switch to 1-knob EQ mode and use the Intensity type to adjust the

amount of EQ applied to the channel. In this case you can adjust from 0% (no EQ applied) to 50% (the EQ settings you made using

manual mode) and 100% (increased intensity of the EQ settings you made using manual mode). This makes it very easy to fine-

tune your EQ settings with just one operation.

If 1-knob EQ mode type is set to Vocal or Loudness, you can adjust the EQ between 0% (no EQ applied) and 100% (maximum EQ

applied).

8 Keyboard display

You can click the bottom of the graph where no parameters are displayed to display a keyboard. This helps you visualize how

the frequencies correlate to musical pitches.