User Manual
Main display area
User’s Guide
TF Editor
-
57
-
Effect parameters
REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One-input, two-output hall, room, stage, and plate reverbs.
MONO DELAY
One-input, two-output basic repeating-type delay.
STEREO DELAY
Two-input, two-output basic stereo delay.
DELAY LCR
One-input, two-output 3-tap delay.
Parameter Range Description
Reverb Time 0.3s – 20.0s Determines the length of the reverberation.
Initial Delay 1.0ms – 500.0ms Determines the amount of time that passes before the initial reverberation is heard.
High Ratio 0.1 – 1.0 Ratio of high frequency reverberations to the Reverb Time.
Diffusion 0 – 10 Left and right spread of the reverberation.
Density 0% – 100% Density of the reverberation.
HPF Thru, 21.2Hz – 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz – 16.0kHz, Thru Low-pass filter cutoff frequency.
Parameter Range Description
Delay 1.0ms – 2700.0ms Delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1 – 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz – 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz – 16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note ----, – Value used to calculate the delay time based on the tempo.
Parameter Range Description
Delay L 1.0ms – 1350.0ms Left channel delay time.
Delay R 1.0ms – 1350.0ms Right channel delay time.
Feedback Gain L -99 – +99 Left channel feedback gain.
Feedback Gain R -99 – +99 Right channel feedback gain.
High Ratio 0.1 – 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz – 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz – 16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note L ----, – Value used to calculate the left channel delay time based on the tempo.
Note R ----, – Value used to calculate the right channel delay time based on the tempo.
Parameter Range Description
Delay L 1.0ms – 2700.0ms Left channel delay time.
Delay C 1.0ms – 2700.0ms Center channel delay time.
Delay R 1.0ms – 2700.0ms Right channel delay time.
Delay FB 1.0ms – 2700.0ms Feedback delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1 – 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz – 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz – 16.0kHz, Thru Low-pass filter cutoff frequency.
Level L -100 – +100 Left channel level.
Level C -100 – +100 Center channel level.
Level R -100 – +100 Right channel level.
Sync Off, On Delay time tempo sync.
Note L ----, – Value used to calculate the left channel delay time based on the tempo.
Note C ----, – Value used to calculate the center channel delay time based on the tempo.
Note R ----, – Value used to calculate the right channel delay time based on the tempo.
Note FB ----, – Value used to calculate the delay feedback time based on the tempo.