User Manual

Main display area
User’s Guide
TF Editor
- 60 -
M BAND COMP
Two-input, two-output three-band compressor. Each band has solo and gain reduction metering.
PING PONG DELAY
One-input, two-output ping pong delay. The delayed sound alternates between left and right at equal intervals.
DUAL PITCH
Two-input, two-output pitch-shift effect.
Parameter Range Description
Low Gain -12.0dB – +12.0dB Low-band gain.
Mid Gain -12.0dB – +12.0dB Mid-band gain.
High Gain -12.0dB – +12.0dB High-band gain.
Total Gain -72dB – +12dB Overall gain.
L-M XOver 21.2Hz – 8.00kHz Low-to-mid crossover frequency.
M-H XOver 21.2Hz – 8.00kHz Mid-to-high crossover frequency.
Knee 0 – 5 Crossover knee (all bands).
Low/Mid/High Link Off, On When turned on, the difference in the threshold for low, mid, and high is maintained.
Low Thr -54dB – 0dB Low threshold.
Low Ratio 1:1 – ∞:1 Low ratio.
Low Attack 0ms – 120ms Low attack time.
Low Release 3.34ms – 42.7s Low release time.
Low Bypass Off, On Compression bypass feature for low.
Low Solo Off, On Solo feature for low.
Mid Thr -54dB – 0dB Mid threshold.
Mid Ratio 1:1 – ∞:1 Mid ratio.
Mid Attack 0ms – 120ms Mid attack time.
Mid Release 3.34ms – 42.7s Mid release time.
Mid Bypass Off, On Compression bypass feature for mid.
Mid Solo Off, On Solo feature for mid.
High Thr -54dB – 0dB High threshold.
High Ratio 1:1 – ∞:1 High Ratio
High Attack 0ms – 120ms High attack time.
High Release 3.34ms – 42.7s High release time.
High Bypass Off, On Compression bypass feature for high.
High Solo Off, On Solo feature for high.
Parameter Range Description
Delay 1.0ms – 1350.0ms Delay time.
Feedback Gain -99% – 99% Amount of feedback.
High Ratio 0.1 – 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz – 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz – 16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Parameter tempo sync.
Note ----, – Value used to calculate the delay time based on the tempo.
Parameter Range Description
Pitch 1 -24 – 24 Pitch of Ch1 (semitone increments).
Fine 1 -50 – 50 Pitch of Ch1 (1 cent increments).
Level 1 -100 – 100 Volume of Ch1.
Pan 1 L63 – R63 Pan of Ch1.
Delay 1 1.0ms – 1000.0ms Delay time of Ch1.
Feedback Gain 1 -99 – 99 Feedback level of Ch1.
Pitch 2 -24 – 24 Pitch of Ch2 (semitone increments).
Fine 2 -50 – 50 Pitch of Ch2 (1 cent increments).
Level 2 -100 – 100 Volume of Ch2.
Pan 2 L63 – R63 Pan of Ch2.
Delay 2 1.0ms – 1000.0ms Delay time of Ch2.
Feedback Gain 2 -99 – 99 Feedback level of Ch2.
Mode 1 – 10 Width of pitch shift.
Sync Off, On Parameter tempo sync.
Note 1 ----, – Value used to calculate Delay 1 based on the tempo.
Note 2 ----, – Value used to calculate Delay 2 based on the tempo.