User Manual

Main display area
User’s Guide
TF Editor
- 62 -
SEND TO AUX screen
Allows you to configure the amount of signal from each channel is sent to the AUX buses.
You can drag left and right to view other buses.
1 Send button
Determines whether a signal is sent (on) or not sent (off) to the corresponding AUX bus.
2 Send level slider
Determines the amount of signal sent to the corresponding AUX bus.
3 Pre button
Selects whether to send the signal to the AUX channel from before the fader, or from after the fader.
On: Before the fader
Off: After the fader
4 Send pan slider
Displayed for stereo AUX buses. Allows you to adjust the pan of the signal sent to the AUX bus.
ձ
ղ
ճ
մ