User Manual

Main display area
User’s Guide
TF Editor
- 65 -
2 Level indicator
Use this indicator to check whether the input gain going into the AUTOMIXER is appropriate.
Off: No input signal, or not enough input level
Lighted green: Input gain is appropriate
Lighted red:Overload input
3 Automix gain meter
Displays the gain that was adjusted using the AUTOMIXER.
4 Weight indicator
Displays the value that was set in the 5 Weight text box as a bar graph.
5 Weight text box
Adjusts the signal level inputted into the AUTOMIXER side chain. When this is set to the same value as other channels, the
gain of audio signals that are inputted at the same time will be equally distributed. When this value is increased, the gain of
audio signals that are inputted at the same time will be distributed to create a louder sound compared with other channels.
Setting range: -100.0 dB, -29.5 dB–0.0 dB (default setting)–15.0 dB
6 Group selection button
Selects whether to assign either AUTOMIXER group a or b. You can use groups to independently create two types of mixes.
The background color changes according to the group selected.
7 Group Bypass a/b buttons
Turns the Automixer function bypass on/off for each group.
NOTE
Adjust the input gain using the analog gain, digital gain and faders for each input channel.