User Manual
Main display area
User’s Guide
TF Editor
-
66
-
CH VIEW screen
Provides an overview of all the settings for a channel.
You can change settings using this screen, in addition to the corresponding feature's configuration screen. Items displayed on this
screen vary depending on the type of channel selected.
CH1–CH32
1 Channel name
Click to display the CH NAME screen (page 78).
Click to display information for a different channel.
2 Recall Safe button
Turns Recall Safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by clicking the jump button in the right corner of the Recall Safe button.
3 Input source indicator
Displays the input channel's input source. You can select the input source on the INPUT screen.
4 Mute Safe button
Click to temporarily exclude the selected channel from the input mute group.
If you mute the input mute group, any channels in that group that have mute safe enabled will not be muted.
5 HA/EQ/GATE/COMP boxes
Click to display the configuration screen for the corresponding feature.
You can click the EQ, GATE, and COMP buttons displayed here to turn the corresponding feature on and off.
HA box: Displays the INPUT screen (page 45).
EQ box: Displays the EQ screen (page 48).
GATE box: Displays the GATE screen (page 51).
COMP box: Displays the COMP screen (page 53).
AUTOMIXER box (CH1–CH8 only): Displays the AUTOMIXER screen (page 64).
6 Channel on/off button
Turns the selected channel on and off.
7 Channel pan slider
Adjusts the pan for the selected channel.
8 FX1/FX2 boxes
Displays the effect type.
When selected, you can use the mouse wheel to adjust the effects send level. You can also display the corresponding effect's
configuration screen by clicking again.
Each box displays the amount of signal from the selected channel that is sent to the corresponding effects module.
Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the triangular bar.
Displays whether the signal sent to the FX1/2 return channel is from directly before the fader, or directly after the fader. If the
indicator lights green, the signal is directly before (pre-fader); and if the indicator is off, the signal is directly after (post-fader).
չ
պ
ջռսվտ
ճ
ձղմ յնո
շ