User Manual

Basic setup and operation
User’s Guide
TF Editor
- 7 -
Setup menu
Allows you to enable and disable the features explained below. When a feature is enabled, a checkmark is displayed in the menu.
Select the item again to remove the checkmark and disable the feature.
Channel Select Link
Determines whether the channel selection is also synced when syncing data between your computer and the console.
Network Interface
Allows you to select the network port used for communication between your computer and the console.
Selections displayed here vary depending on your computer and network environment.
Confirmation
Determines whether a confirmation dialog is displayed when you use Store, Recall, Input Select, or Output Patch features.
A confirmation dialog is displayed when this item is enabled.
Display Delay Scale
You can select the desired units (frames, meters, feet, milliseconds) used for the delay time displayed in the DELAY box.
Frame Rate
Select the frame rate if you wish to configure the delay in units of frames.
Home Button Function
Selects the section to display when clicking on the HOME button. When "CH Strip & SEL CH" is selected, click the HOME
button to switch between the CH Strip section and Selected Channel section.
Window menu
Allows you to change how screen content is displayed.
Zoom
Allows you change the display size to 100%, 150%, or 200%.
Maximize
Maximizes TF Editor screen content.
When TF Editor is maximized, the FADER area (page 10) is expanded so that more channels can be displayed.
Help menu
Help
Opens the Manual Library in your computer's web browser.
About
Displays version information about TF Editor.
Legal
Displays license information about TF Editor.
NOTE
An Internet connection is required to access the Manual Library.