User Manual

Main display area

User’s Guide

TF Editor

OUTPUT screen

Allows you to select the signals sent to the output channels (OMNI OUT 1–16).

The buttons displayed vary depending on the type of output channel selected.

○: Displayed

–: Not displayed

1 ST button

Determines whether the stereo channel is output or not.

2 SUB button

Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus.

3 SUB slider

Determines the amount of signal sent from the selected channel to the SUB bus.

4 Out Gain text box

Allows you to adjust the output gain.

When selected, you can use the mouse wheel to adjust the setting. Click again to use your computer keyboard to enter a

value.

5 Φ (phase) button

Allows you to reverse the phase.

When turned on, the output signal's phase is reversed.

6 OMNI OUT button

Displays the number of the OMNI OUT to which the channel is directed.

Up to two numbers can be displayed. For three or more numbers, "+" is displayed.

Displays the OMNI OUT screen (page 21).

7 Recall Safe button

Turns Recall Safe on and off for the corresponding channel.

You can display the RECALL SAFE screen (page 22) by clicking the jump button in the right corner of the Recall Safe button.

Output channel type

Buttons

ST button

SUB button

SUB slider

Out Gain

buttons

Φ button

OMNI OUT

indicator

OMNI OUT

buttons

AUX 1–8 – –

○○ ○ ○

AUX9/10–AUX19/20 ○○○○ ○ ○

SUB – – ○○ ○ ○

STEREO – – ○○ ○ ○

MATRIX1–4 – – ○○ ○ ○

յն