User Manual

Main display area

User’s Guide

TF Editor

SEND FROM screen

Allows you to send signals from the each channels.

1 ON button

Determines whether a signal is sent (on) or not sent (off) from the corresponding each channel.

2 Send pan slider

Adjusts the pan of the input channel signal that is sent.

For AUX 1–8, MATRIX1–4, this slider is only displayed if the signal type is set to stereo.

Not displayed for FX1L–FX2R.

3 Send level slider

Determines the amount of signal sent from the corresponding each channel.

4 Pre button

Allows you to select whether the signal sent from the input channel is from before or after the fader.

On: Before the fader

Off: After the fader

Not displayed for MATRIX 1–4. You can send the post-on signal of an AUX channel, STEREO channel, or SUB channel to a

MATRIX channel.

SEND FROM screen menu

The following items are displayed in the menu area when the SEND FROM screen is displayed.

1 All Pre

Turns on all Pre buttons.

2 All Post

Turns off all Pre buttons.

3 All Nominal

Sets all SEND levels to nominal (0 dB).

4 Dup. STEREO

Duplicate STEREO. Copies each channel's fader level and applies it to the

SEND level.

5 Copy

Copies the SEND level for the selected AUX/MATRIX channel.

6 Paste

Pastes the SEND level you copied to the selected AUX/MATRIX channel.