User Manual

Main display area

User’s Guide

TF Editor

DELAY screen

Sets the delay for signals outputted from the MATRIX channels, and the delay for signals inputted to the ST IN channel.

1 DELAY button

Turns the DELAY on and off.

2 Display selection button

When a MATRIX channel is set to "Stereo", select the MATRIX channel that will display the parameters.

Two buttons are always displayed on the ST IN channel.

3 LR Link button

If the MATRIX channel is set to stereo, the DELAY on/off and delay time operations for the left/right channels will be linked

together when this is turned on. When the delay times are set to a different value, the delay times will operate in linked mode,

maintaining the time difference.

The LR Link button is always displayed on the ST IN channel.

4 DELAY slider

Allows you to adjust the delay time.

You can specify the delay time in frames, meters, feet, or milliseconds.

5 DELAY setting

Determines the delay time by specifying frames, distance (meters or feet) or time (milliseconds). Click a text box to display

the keyboard and enter a value.

NOTE

For MATRIX channels, this is displayed only when the channel is set to stereo. Switch between Stereo and MONOx2 using the BUS SETUP

screen, found on the SETUP screen for this unit. (page 20)

ձ ղ