User Manual

Screens of the File Menu
User’s Guide
TF Editor
- 87 -
Input List screen
Allows you to view and set input channels and output channels, as well as DCA group channel names, channel colors, channel
icons, and patching.
1 Toolbar
Copy button
Copies the selected channel (row), parameter (column), or cell content.
Paste button
Pastes the copied content and applies it to the selected location.
Default button
Resets the selection to its default values.
If this operation is applied to a channel (row), a confirmation message is displayed.
Click OK to reset the channel to its default values. Click Cancel to cancel the reset operation.
When you click a parameter's title, the entire parameter column is selected. If you click the Default button in this state, the
corresponding parameter of the selected channels will be reset to its default values.
Enable Confirmation checkbox
When this checkbox is selected, a confirmation message is displayed when you reset settings to their default values or change
Input Select or OMNI OUT settings.
2 Display view tabs
Allows you to display Input, Output, or DCA information.
3 Edit area
Allows you to set the channel name, channel icon, channel color, and patching for the channel that is displayed. The available
parameters vary depending on the type of channel.
Information changed here will be reflected in the TF Editor main window. Additionally, when the TF series console is
connected, changes are synchronized between the TF Editor and the console.
You can display the context menu by right-clicking (Windows) or control-clicking (Mac) in the Edit area.
NOTE
OMNI OUT settings are not subject to Copy/Paste/Default operations.
䐟䐠䐡
䐟䐠䐡䐟䐠䐡